The three-dimensional vibrating screen is also commonly referred to as vibrating screen. It is the most common light screening series, which can effectively screen, remove and classify powder, small particles and liquid materials. Gaofu Company learned from the daily customer feedback records that many users of the vibrating screen encountered the problem of slow discharge on the screen when using it. For this problem, this paper shares three effective solutions. The user of the vibrating screen is When you encounter this problem, you can refer to the solution.
1. If it is a new equipment, this problem occurs at the beginning of use. It should be checked whether the screen and the discharge port of the vibrating screen are at the same level. If the screen and the discharge port are not horizontal, it will cause the vibrating screen. The problem of miscellaneous slowness appears, which belongs to the production quality of the vibrating screen. It should be contacted by the manufacturer and required to be repaired by the manufacturer;
2. Check whether the whole of the vibrating screen is working under the horizontal condition. If the whole equipment is not in the horizontal plane, the problem of slow discharge of the vibrating screen will occur, affecting the screening efficiency, and the damping ground of the vibrating screen can be added or subtracted. Foot to solve this problem;
3. If neither of the above problems exist, the angle of the eccentric block of the vibrating motor of the vibrating screen can be adjusted to change the speed of the material moving on the screen surface. The smaller the angle, the faster the material will spread outward; the angle The larger the material, the slower the material will spread out. The angle of the eccentric block of the vibration motor should be ≥5°. In addition, if the angle of the eccentric block of the vibration motor is too small, the accuracy of the screening will be affected, so the user should adjust it according to the condition of the material and the precision of the screening.
Concerned about surprises
Label: How to solve the problem of slow vibration of the vibrating screen
Previous: Hydraulic system according to standard commissioning and maintenance and its next article: Preparation and inspection of clean water self-priming pump before starting
Pure Cotton Protective Face Mask,Medical Mask With Elastic Earloop,Cotton Face Mask,Cotton Filter Face Mask
GULF STAR MEDICAL MANUFACTURING FZE , https://www.gulfstarmedical.com