1. Always check the fastening of each component to prevent it from loosening and damaging the machine.
2. Each oil hole is often refueled; the bearing parts are cleaned and refilled once every six months.
3. When the operation is stopped, the machine should be idle for a period of time. The remaining material in the blower will shut down.
4. When the machine stops, it should remove the sundries in the machine. For all the rotating parts: do the daily grease, and store it in the air-dry, glazed warehouse.
Concerned about surprises
Label: Maintenance and placement of plastic shredder
Previous: How to deal with the wear and tear of the edge of the conveyor belt when the belt is deflected Next: The maintenance method of the vacuum furnace
Table Plasma Cutting Machine features:
1. Table Plasma Cutting Machine with welded lathe bed of thick profiled steel, more solid and stable.
2. Perfect lathe table design, 8mm steel plates fixed on lathe table covered by cast sheath.
3. Advanced material inclined discharging design.
4. Table plasma Cutting Machine support FASTCAM nesting software such as the standard G code path generated file can also be read by software conversion software such as AUTOCAD generated DXF formats. U disk exchange control system processing files, easy to operate.
5. Table plasma cutting machine support CAMDUCT software professional for air duct industry.
Table Plasma Cutting Machine
Plasma Cutter For Stainless Steel,Cnc Steel Cutting,Ss Cutting Machine,Ss Plate Cutting
Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnformingmachine.com