Car Security System Single Channel and Double Channel Loop Detector Vehicle Detector for Car

  • Model NO.: HZ-LD200
  • Style: European
  • Sound Insulation: 30
  • Position: Interior
  • Surface Finishing: Finished
  • HS Code: 73083000, 73083000
  • Transport Package: Plywood Case or Cardboard, as Your Request.
  • Origin: China
  • Material: Aluminum Alloy
  • Open Style: Automatic
  • Veneer Wood: Wood Grain
  • Security Rating: C
  • Function: Security
  • Trademark: HZ or As Your Request
  • Specification: as you like or design by us

Loop detectors are used wherever vehicles have to be detected. Like monitoring and safe guarding access ways for counting vehicles. The output signal can be used for controlling door and gate drive mechanisms, road barriers, controlling traffic light systems in car parks or activating card dispensers in car parks.

 

The principle is based on a change in the inductance within the loop which is caused by the metallic components of passing vehicles. The changes are picked up and evaluated by a microprocessor. Ease of use due to the automatic calibration when the operating voltage is applied. 

Car Security System Single Channel and Double Channel Loop Detector Vehicle Detector for Car

Barrier Gate Metal Vehicle Loop Detector

Car Security System Single Channel and Double Channel Loop Detector Vehicle Detector for Car

Specifications

While the detector is tuning, the green Channel LED and red Power LED will be turn on. It remain about 2 seconds, then the green

 

Technical Data

Supply voltage:230V AC , 115V AC, 24V DC/AC, 12V DC/AC 

( See the label on the detector)  

Voltage tolerance AC: +10% / -15%

Voltage tolerance DC: ±15%

Power Consumption: 4.5VA               

Output relays: 240V/5A

Operating temperature: -20°C to +65°C          

Storage temperature: -40°C to +85°C

Frequency range: 20 kHz to 170 kHz

Reaction time: 10ms                        

Signal holding time: Unlimited / limited when loop is permanently covered 10 minutes 

Sensitivity:          Adjustable in 4 increments           

Loop inductance:Total loop plus connection wiring:50μH to 1000μH.

Ideal is 100μH to 300μH

Loop connection wiring: Maximum length 20 meters, twisted at least 20 times per meter 

Size of Housing: 78x40x108 mm (L x W x H)
 

Supply voltage AC 220V, 110V, 24V, 12V 
Supply voltage DC 24V, 12V
Sensitivity 0.013%-0.1%
Operating Temperature -20°C to +70°C
Storage temperature -40°C to +85°C
Frequency Range 20 kHz to 200 kHz
Reaction Time 100ms
Loop inductance Ideal: 80μH to 300μH  (incl. conn. wiring)
Loop connection <5m optimal
Loop connection wiring Maximum length 200 meters  Twisted at least 20 times per meter
Dimensions 37x74x85 mm (WxHxL)
Net Weight 250g
 
  Install Detector

The loop detectors must only be placed in dry rooms or control cabinets that are protected against all types of moisture and wetness. A distance of at least 10 mm from other devices must be maintained on each side. The ambient temperature must not exceed 65° C. The installation of the induction loop is described in other operating instructions.

Operation and Indication

When the power is applied, the red Power LED will glow and the detector is tuning, the green Check LED blink about 3 seconds. The green LED will also glow whenever a vehicle is detected passing over the inductive loop. If a loop fault exists the green LED will come on and flash indicating a fault. 

 


Car Security System Single Channel and Double Channel Loop Detector Vehicle Detector for Car
Car Security System Single Channel and Double Channel Loop Detector Vehicle Detector for Car
Car Security System Single Channel and Double Channel Loop Detector Vehicle Detector for Car
Car Security System Single Channel and Double Channel Loop Detector Vehicle Detector for Car




What service you can get from us ?
1) OEM service for you and your clients .
2) Arrange the shipment for you to everywhere .
3) CE / ISO-9001 / SGS Certification
4) Installation video or instruction for you.
5) Available suggestion about the correct doors.
6) Professional service supporting with different language , email or phone calling .
7) Operating guidance and instruction after installation .
8) Professional / Tirelessly after-sales service .
9) 12 Months warranty for all doors and accessories.

End Feed Fittings

Brazing Bend,Brazing Straight Coupling,Street Elbow

M Profile Press Fittings Co., Ltd. , http://www.nspipefitting.com