GB Black/Green Silicon Carbide for Abrasive & Refractory

Model NO.: HH-BSC

Hardness: Superabrasive

Certificate: ISO9001

Fe2o3: 0.06%-1.2%

Refractory Size: 0-1mm 0-10mm 0-100mm

Sic: 68%-98%Min

F.C: 0.2%-0.6%

Mohs Hardness: 9

Color: Green, Black

Shape: Granular, Powder

Sample: Free

Product Name: GB Black/Green Silicon Carbide for Abrasive & Refr

Trademark: HH

Transport Package: 25kg Per Bag

Specification: 16-220mesh

Origin: Ningxia

HS Code: 284920000

Model NO.: HH-BSC

Hardness: Superabrasive

Certificate: ISO9001

Fe2o3: 0.06%-1.2%

Refractory Size: 0-1mm 0-10mm 0-100mm

Sic: 68%-98%Min

F.C: 0.2%-0.6%

Mohs Hardness: 9

Color: Green, Black

Shape: Granular, Powder

Sample: Free

Product Name: GB Black/Green Silicon Carbide for Abrasive & Refr

Trademark: HH

Transport Package: 25kg Per Bag

Specification: 16-220mesh

Origin: Ningxia

HS Code: 284920000

GB Black/Green Silicon Carbide for Abrasive & Refractory

^{Silicon carbide is made of quartz sand, stone tar (or coal), wood chips and other raw materials in the resistance by high temperature smelting, silicon and carbon bonds made of ceramic compounds.
The sintered silicon carbide powder can provide hard ceramic-like silicon carbide particles and can be used in materials such as automotive brake pads, clutches and ballistic vests that require high durability, such as light-emitting diodes, early radio detectors Classes are also used in the manufacture of electronic devices. Silicon carbide is now widely used in the manufacture of high temperature, high voltage semiconductors. By lely method to grow large pieces of silicon carbide single crystal. The gemstone of artificial mulberry is obtained by cutting the bulk silicon carbide single crystal prepared by the Lely method.
Â Â Â Â Â Â Â At present, China's industrial production of silicon carbide is divided into black silicon carbide and green silicon carbide two, are hexagonal crystal, green silicon carbide and black silicon carbide is basically the same, but the raw materials and manufacturing processes are produced, the product was green translucent body , Hardness, purity are better than black silicon carbide.}
$GB Black/Green Silicon Carbide for Abrasive & Refractory$
$GB Black/Green Silicon Carbide for Abrasive & Refractory$

physical And Chemical Analysis:

^{Reference Chemical Composition (weight%) of silicon carbide of non-abrasives applicationÂ}
^Type	^{Reference Chemical Composition (weight %)}						^{Grit Size}
	^SiC(min)			^F.C(max)		^Fe2O3(max)
^TN98	^98.00			^1.00		^0.80	^{0-1mm, 1-3mm, 3-5mm, 5-8mm, 150# , 200#, 325#Â Â and asÂ customer's}
^TN97	^97.00			^1.50		^1.00
^TN95	^95.00			^2.50		^1.50
^TN90	^90.00			^3.00		^2.50
^TN88	^88.00			^3.50		^3.00
^TN85	^85.00			^5.00		^3.50
^TN70	^70.00			^10.00		^3.50
^TN60	^60.00			^12.00		^3.50
^TN50	^50.00			^15.00		^3.50
^{Black Silicon Carbide Content for Concretion Grinder}
^Brand			^{Grit Size}		^{Chemical Composition(%)}
					^SIC(min)		^F.C(max)	^Fe2O3(max)
^{BlackÂ silicon carbide}			^F12-F90		^98.5		^0.20	^0.60
			^F100-F150		^98.5		^0.30	^0.80
			^F180-F220		^97.0		^0.30	^1.20
^{Black Silicon Carbide Content for Coating Grinder}
^Brand		^{Grit Size}			^{Chemical Composition(%)}
					^SIC(min)		^F.C(max)	^Fe2O3(max)
^C-P		^P12-P100			^98.0		^0.25	^0.70
		^P120-P150			^97.5		^0.35	^0.90
		^P180-P220			^96.0		^0.35	^1.35

^{Commonly size:
Section of sand: 0-1, 1-3, 3-5, 5-8mm
Granular: 16, 20, 24, 30, 36, 46, 60, 80, 100, 120, 150, 180, 200, 220, 320mesh
Powder: 325, 400, 600, 800, 1000, 1200, 1500, 1800, 2000, 2500, 3000mesh}
$GB Black/Green Silicon Carbide for Abrasive & Refractory$
$GB Black/Green Silicon Carbide for Abrasive & Refractory$
$GB Black/Green Silicon Carbide for Abrasive & Refractory$

^{Usage of the silicon carbide:

Firstly: Silicon carbide is mainly used as abrasive in manufacturing grinding wheel, abrasive paper, abrasive belt, abrasive, grinding, grinding head, grinding paste, etc.
Sic grinding tool can be used in the manufacture of consolidation, coated abrasive grinding and freedom, to the processing of glass, ceramic, stone, jade, cast iron, stainless steel, floor tile and some non-ferrous metals, hard alloy, titanium alloy, high speed steel props and grinding wheel etc.
Â
The second: refractory materials (silicon carbide powder, silicon carbide particles)
Silicon carbide as inorganic nonmetallic materials with high temperature resistant, wear resistant characteristics of silicon nitride combined with silicon carbide products can be used in the blast furnace ceramic cup, etc.In air brick as ladle with magnesia carbon brick, aluminum silicon carbide can also act as antioxidants added.
Made of silicon carbide refractory plate high crushing strength, long service life, low thermal capacity, low thermal conductivity.The brittle material, good toughness;Good flatness, size accurate,Easily cut installation, construction is convenient;Excellent resistance to wind erosion performance;Continuous production, uniform fiber distribution, stable performance;Excellent sound-absorbing noise reduction performance.
Â
Third: steel making, casting industry (particles of silicon carbide, silicon carbide, silicon carbide, silicon carbide powder)
Silicon carbide as steelmaking deoxidizer can make molten steel quality is stable, and has fine grains, remove steel always harmful impurities, after using molten steel casting temperature, casting are of good quality and low cost per unit.
Silicon carbide can be all alternative ferrosilicon and recarburizer FeALSi dosage decreased, which can effectively reduce the cost of steelmaking.
Decomposition of silicon carbide at high temperature and oxidation is exothermic reaction process, positive pressure in the furnace is strong, and can guarantee lower sulfur content.
Â
Fourth: photovoltaic industry, polishing, grinding, high-tech research and development, and other industries (silicon carbide micro powder)
Silicon carbide powder is mainly used for refractory products manufacturing, and foam ceramic industry, solar silicon original cutting, crystal cutting, grinding, car engine manufacturing, special coating industry, plastics modification, desulfurization, power supply, environmental protection industry, etc}

$GB Black/Green Silicon Carbide for Abrasive & Refractory$
Â GB Black/Green Silicon Carbide for Abrasive & Refractory

^{Silicon carbide is made of quartz sand, stone tar (or coal), wood chips and other raw materials in the resistance by high temperature smelting, silicon and carbon bonds made of ceramic compounds.
The sintered silicon carbide powder can provide hard ceramic-like silicon carbide particles and can be used in materials such as automotive brake pads, clutches and ballistic vests that require high durability, such as light-emitting diodes, early radio detectors Classes are also used in the manufacture of electronic devices. Silicon carbide is now widely used in the manufacture of high temperature, high voltage semiconductors. By lely method to grow large pieces of silicon carbide single crystal. The gemstone of artificial mulberry is obtained by cutting the bulk silicon carbide single crystal prepared by the Lely method.
Â Â Â Â Â Â Â At present, China's industrial production of silicon carbide is divided into black silicon carbide and green silicon carbide two, are hexagonal crystal, green silicon carbide and black silicon carbide is basically the same, but the raw materials and manufacturing processes are produced, the product was green translucent body , Hardness, purity are better than black silicon carbide.}
$GB Black/Green Silicon Carbide for Abrasive & Refractory$
$GB Black/Green Silicon Carbide for Abrasive & Refractory$

physical And Chemical Analysis:

^{Reference Chemical Composition (weight%) of silicon carbide of non-abrasives applicationÂ}
^Type	^{Reference Chemical Composition (weight %)}						^{Grit Size}
	^SiC(min)			^F.C(max)		^Fe2O3(max)
^TN98	^98.00			^1.00		^0.80	^{0-1mm, 1-3mm, 3-5mm, 5-8mm, 150# , 200#, 325#Â Â and asÂ customer's}
^TN97	^97.00			^1.50		^1.00
^TN95	^95.00			^2.50		^1.50
^TN90	^90.00			^3.00		^2.50
^TN88	^88.00			^3.50		^3.00
^TN85	^85.00			^5.00		^3.50
^TN70	^70.00			^10.00		^3.50
^TN60	^60.00			^12.00		^3.50
^TN50	^50.00			^15.00		^3.50
^{Black Silicon Carbide Content for Concretion Grinder}
^Brand			^{Grit Size}		^{Chemical Composition(%)}
					^SIC(min)		^F.C(max)	^Fe2O3(max)
^{BlackÂ silicon carbide}			^F12-F90		^98.5		^0.20	^0.60
			^F100-F150		^98.5		^0.30	^0.80
			^F180-F220		^97.0		^0.30	^1.20
^{Black Silicon Carbide Content for Coating Grinder}
^Brand		^{Grit Size}			^{Chemical Composition(%)}
					^SIC(min)		^F.C(max)	^Fe2O3(max)
^C-P		^P12-P100			^98.0		^0.25	^0.70
		^P120-P150			^97.5		^0.35	^0.90
		^P180-P220			^96.0		^0.35	^1.35

Kylin Chemicals have been engaged in the research & manufacturing a selected range of Chemical Intermediates & specialties for over one decades,such as hydroxylamine sulfate.

We have the expertise in manufacturing high quality Aromatic Hydrocarbons specialties, serving our customers worldwide in the field of pharmaceuticals, agrochemicals, organic synthesis and coatings, etc. Our main aromatic hydrocarbon product include 2,3-Dihydroindene, Decahydronathalene, Tetrahydronaphthalene, Carbazole, Acenaphthene and Phenanthrene,1 2 3 4-tetrahydronaphthalene, etc.

Tetralin CAS 119-64-2

Our manufacturing base have the advanced DCS operated hydrogenation & rectification facilities, effective quality-control systems, and a very professional technical team, assuring the quality, stability and sustainability to meet/exceed our customers` needs.

Aromatic Hydrocarbons & Specialties

Aromatic Hydrocarbons, Intermediates & Specialties,Advanced Intermediates,Chemical Intermediates,Chemical Specialities

Kylin Chemicals Co., Ltd. , http://www.kylin-chemicals.com