Cylindrical Inner Bore Inlet Bearing Device

---

When the inner ring of a bearing is tightly fitted with the shaft, and the outer ring is loosely coupled with the housing bore in a non-removable assembly, it's recommended to first mount the bearing on the shaft. Once mounted, the shaft along with the bearing can then be inserted into the housing. For smaller bearings, you may use a soft metal hammer to gently tap the end face of the bearing ring, ensuring even force distribution across the ring to avoid damage. In cases where the outer ring is tightly fitted with the housing bore, while the inner ring remains loosely coupled with the shaft, the bearing should be installed on the shaft first. When either the inner or outer ring is tightly engaged with the shaft or housing, it’s essential to use a special sleeve tool to press the bearing into place. For separable bearings, installation is more straightforward since both the inner and outer rings can be removed easily. However, care must be taken during installation—ensure that the shaft, once placed inside the inner ring, is smoothly inserted into the housing with the outer ring already in place. Maintaining concentricity is crucial to prevent any damage to the rolling elements or raceways. When dealing with larger bearings, or when the fit requires significant force due to heavy-duty applications, cold mounting may not be practical. In such situations, it’s advisable to heat the inner ring or the bearing housing before installation. The heating temperature must be carefully controlled—never exceeding 120°C, typically ranging between 80–100°C. Bearings with dust covers or seals should not be heated, as this could lead to lubricant loss. Common heating methods include electric induction, oil bath, or other safe techniques.

---

Related Bearing Knowledge:

• Bearing Processing Heat Treatment Process and Application of Skills
• Methods for Removing, Overhauling, and Inspecting Bearings
• The Function of Spindle Bearing Oil
• Experience in Repairing Static Pressure Bearings in Grinding Machines
• Explanation of Aligning Drill Bearings

This article was originally published at http://. Please credit the China Bearing Network: http://. Previous Article: The Five Main Rules of Sliding Bearings Next Article: Methods for Preventing Bearing Rust

PVC Fabric High Speed Rolling Doors

PVC fabric material high speed rolling doors can open and close in a very fast speed, to improve work efficiency and also keep inside room clean by preventing dust. This type rapid doors are very cost effective to save your one-time purchase cost and also future maintenance cost. Simple and stable design make such PVC fast door very stable and low maintenance level. You will feel at ease to use such PVC fabric material high speed roll up doors in your factory and warehouse.

PVC High speed doors, PVC rapid rolling doors, PVC fast roller doors, PVC fabric rolling doors, PVC fabric high performance doors

SHANGHAI KENVO DOOR CO.,LTD , https://www.kenvodoor.com