Tile tile tiles for the attention of the best use of dry shop


Mona Lisa Tiles

Tiles should pay attention to the following matters:

1, before the tile shop to spend sampling should be to see if the grade, color and sample look the same, if confirmed, it is best to let the person in charge of construction sign, or immediately notify the tile vendors.

2. If the wall is a putty wall or a calendered concrete wall, it must be removed and roughened. Wall tiles must not have less than 1/3 bricks.

3, the ground should be fully wet, play a horizontal line on the wall and on the ground to advance the line, to ensure that the low bricks in each room on the same level.

4, floor tiles is best to use "dry shop" method.

5, bathroom tiles should be set aside about 1% of the slope, and lower than the outer floor tiles about 10mm. The slope of kitchen tiles should be appropriately reduced.

6. The angle of 45 degrees should be used when facing the angle of Yang Yang. The lower edge of the waist line should be the upper edge of the window.

7. After the wall tiles have been plastered for 3-5 days, finish the construction again.

Tile Flooring Knowledge Building Tiles Room Cement Window Kitchen Wall Tiles Bathroom Wall Tiles Bathroom Tiles Bathroom Tiles Kitchen Tiles Ld Tiles

Product Description
•Material: 100% virgin PTFE, no recycle.
•Certificate: ISO9001,MSDS,RoHs,REACH,FDA,Certificate of Origin.
•Own best performance,can be filled other material such as Bronze,Fiber glass,Carbon,Graphite and so on.
•Size could be made on the basis of customer's requirement.
•Payment item: T/T,L/C,DP or others.
•Price item: FOB,CIF,CFR and so on.
•Delivery time: As your request,usually within 7 days.
         Free samples can be offered as your requirements.
SPRCIFICATION:
Item Thickness Length& Width
Molded sheet 3~~100mm Length*Width
300*300mm------2000*2000mm
Skived sheet 0.2~~6.5mm Width 100---2700mm
Length: by roll
PTFE Sheet 1/64~1/4 48*48 , 60*60
MAIN PROPERTIES:
Item Unit Value
Gravity g/cm3 2.10-2.3
Tensile Strength MPa more than 15
Elongation Break % more than 150
Dielectric Strength Kv/mm 10

PTFE Sheet

100% Pure PTFE Sheet,Plastic PTFE Teflon Sheet,PTFE Teflon Baking Sheet ,100% Virgin White PTFE Sheet

ZHENJIANG CHUNHUAN SEALING MATERIALS CO.,LTD(GROUP) , http://www.chsealing.com