Paving tile flooring, if the loss is large, the loss of owners is not small. Many homeowners are worried that tiles and floors will be worn out too much, but which ones are normal losses and which ones are malicious losses. What should you watch out for in the tile and floor paving process? The owner must first understand that the loss is inevitable in the construction process, in order to reduce the abnormal losses from the entire process link.
Kanghui solid wood flooring
Accept normal loss
In the process of laying tiles and floors, the loss is inevitable. Experts explained that because the size of the room does not necessarily match the size of the tile, the tile needs to be cut. If the tile is cut off, it will cause damage. According to reports, generally speaking, the overall loss rate of ceramic tiles is between 5% and 10%. "The owner first of all has to accept the concept of normal loss objectively, because this is the inevitable construction."
The normal wear and tear is caused by the following reasons: The size of the space in the house does not match the size of the tiles. Huang Xiangling, for example, said that if the house is 3.65 meters wide, then 600 x 600 mm tiles are just right, but if it is a 4 meter wide house, the remaining 20 centimeters of tiles will have to be cut off and cause losses. In addition, the larger the size of the selected tiles, the greater the loss. If it is a 800 × 800 mm, 1200 × 1200 mm tile, the ceramic tile that has been cut off will be more depleted, and the loss is far more than 10%.
In accordance with the standards of national ceramic tile factory, there will be differences in color, thickness, thickness, and squareness in the country's ceramic tile factory. Even a batch of qualified tiles will have unqualified products. The tiles purchased by the owners have more or less Some unqualified products. In the construction, cutting the tiles will also have a work difference, that is, the presence of normal mistakes. According to reason, the loss of two tiles in 100 tiles is a normal range. These losses are normal.
Related to this, experts say that the normal loss of the floor is 5%, and its loss is also related to many factors, such as the shape of the house. If there are many corners and arcs in the house, the loss is relatively large; the smaller the room, the greater the loss; if the house Very square or the size of the house matches the size of the floor, the loss is relatively small; in addition, the technical proficiency of the workers will also have a certain impact on the loss, skilled workers will probably measure the house and calculate how to shop for it.
Pay attention to abnormal wear and tear
Unusual losses also exist in the actual process. According to experts, the abnormal loss of tiles is mainly caused by improper purchase and construction. It is understood that if the quality of the tiles is poor, the possibility of damage during construction will be large, and the loss will be large. However, if the customer cannot accept that the tile color difference is too large, the worker will take the tile with large color difference, out of squareness, and chapped skin when pre-paving. Out of the product, if it is a product that can't be returned at a low price, "this loss is very alarming." In construction operations, such as paving, accidentally breaking the tile, even if the worker is unfamiliar, if 100 The number of broken pieces in a block tile exceeds 2 pieces, which are considered to be malicious losses.
There is also an abnormal loss in the floor. Some workers intentionally waste floorboards, and some workers use the technology to make improper losses.
Decoration Experience Tiles Nature Flooring House Room Space Home Improvement Flooring Tile Flooring Tile ld Tile
Xlong Seal Co., Ltd. , http://www.xmseals.com