As a leader in the tool industry, Sandvik Coromant has won high praise from customers and industry for its high quality products, complete set and optimized solutions. Not only that, the company has also been committed to providing recycling and recycling services for discarded carbide blades and solid carbide cutting tools, implementing a recycling concept (CRC) plan, and consciously assuming corporate responsibility and society to save resources and protect the environment. The mission set an example in the tool industry.
First, adhering to the concept of continuous improvement as early as 1996, Sandvik Coromant has already started the recycling of waste carbide cutting tools, in 2007, the company officially launched the concept of recycling (CRC) plan. The plan has been adhering to the principles of environmental protection and sustainable development strategy since the inception of the project. The Recycling Concept (CRC) program is dedicated to the recovery and reuse of scrap carbide and solid carbide tools, as well as the dissemination and reuse of metal products. Through the remanufacturing of used tools, it can save resources, reduce costs, and protect the environment.
The concept of recycling (CRC) is a complete system project that needs to be perfected as the work progresses. Under the premise of no harm to the environment, the company has established a factory dedicated to waste tool processing in India. The factory has passed two representative certifications of ISO14001 and OHSAS18001 (environmental management certification and occupational health management certification). There are three logistics centers in Europe, Asia and North America. Recycling tools are collected from all countries in the world to these three logistics centers, and then transported to Indian factories.
In this way, the recycling concept (CRC) plan formed a complete network system. On the one hand, with the support of advanced concepts, various tool recovery and remanufacturing operations were carried out. On the other hand, the perfection of a series of hardware facilities also ensured. The smooth development of the CRC plan. Not only that, with the advancement of science and technology, Sandvik Coromant Concept (CRC) will also have new technical and theoretical improvements and breakthroughs.
Second, the refinement process provides a thorough implementation of the service recycling concept (CRC) plan. The initial investment is very large, and many difficulties will be met. On the crucial issue of how to increase the number of recycled blades, the company not only tells users about the environmental benefits of recycling recycling, but also pays attention to the simplicity of operation, and constantly improves daily processes, from the appearance of packaging to Various aspects such as the transportation route between the collection station and the recycling plant.
The process consists of five main steps: 1. The customer orders the recycling bins and transport boxes from Sandvik Coromant and places them in the factory floor. 2. Collect waste blades in the recovery box. 3. After the recovery box is full, transfer the inner blade to the transport box (20 kg per box). 4. The customer transports the transport box to the local Sandvik Coromant office where it is re-routed to the collection station. Empty containers are returned to customers. 5. Used materials are remanufactured in Sandvik Coromant recycling plants using environmental safety technology.
Sandvik Coromant also recommends that all scrap carbide inserts be collected centrally in the production hall, and it is recommended that each station be equipped with a collection box, and the solid carbide drill and end mills should be stored in a collection box. When the bin is full, the scrapped tool can be transferred to a transfer box. When the transfer box is full, it can be delivered to Sandvik Coromant offices. Sandvik Coromant will weigh the entire solid carbide tool and pay it in the form of purchase.
Moreover, in order to facilitate more companies to join the team of recycling ideas, Sandvik Coromant is equipped with an expert responsible for recycling in every market where it conducts business. In this way, the manufacturer has an expert to assist with all recycling operations in each market.
They strive to achieve simple, effective, and scientific innovation services that make the operation more convenient and win more users' participation and support.
3. Achieving outstanding results and opening up a vast market In 2009, Sandvik Coromant's recycling of carbide inserts from companies around the world accounted for approximately 40% of sales.
Recently, there is such a news: "Sandvik Coromant's CRC plan has made great progress after 5 years of introduction in Greater China." In 2005, China's tool recycling quantity was 0, short. In a few short years, it is not just a breakthrough but a "great progress." Its typical success story is with the LKM Group, one of the world's largest mold-frame manufacturers. At that time, China's recycling market was still incomplete. When Longji hoped to recycle about 9.5 tons of waste blades, it would seek support from Sandvik Coromant. Sandvik Coromant was responsible for collecting used carbide blades. And solid carbide cutting tools, and recycling in the most environmentally friendly way.
This is a big step for Sandvik Coromant and a big step for Long Kee Group. It is also a big step for the recycling industry of tool recycling in China. Sandvik Coromant is confident in implementing the CRC program in China and will continue to invest in the world and implement the CRC program. With the emphasis placed on remanufacturing in various countries, there will be great progress and broader prospects for the remanufacturing of the tool industry such as recycling and tool dressing.
The CRC program is not only owned by Sandvik Coromant, it is also global, and in the near future, the CRC plan will be promoted and implemented by Sandvik Coromant. For the benefit of more customers, more countries, and the entire society.
First, adhering to the concept of continuous improvement as early as 1996, Sandvik Coromant has already started the recycling of waste carbide cutting tools, in 2007, the company officially launched the concept of recycling (CRC) plan. The plan has been adhering to the principles of environmental protection and sustainable development strategy since the inception of the project. The Recycling Concept (CRC) program is dedicated to the recovery and reuse of scrap carbide and solid carbide tools, as well as the dissemination and reuse of metal products. Through the remanufacturing of used tools, it can save resources, reduce costs, and protect the environment.
The concept of recycling (CRC) is a complete system project that needs to be perfected as the work progresses. Under the premise of no harm to the environment, the company has established a factory dedicated to waste tool processing in India. The factory has passed two representative certifications of ISO14001 and OHSAS18001 (environmental management certification and occupational health management certification). There are three logistics centers in Europe, Asia and North America. Recycling tools are collected from all countries in the world to these three logistics centers, and then transported to Indian factories.
In this way, the recycling concept (CRC) plan formed a complete network system. On the one hand, with the support of advanced concepts, various tool recovery and remanufacturing operations were carried out. On the other hand, the perfection of a series of hardware facilities also ensured. The smooth development of the CRC plan. Not only that, with the advancement of science and technology, Sandvik Coromant Concept (CRC) will also have new technical and theoretical improvements and breakthroughs.
Second, the refinement process provides a thorough implementation of the service recycling concept (CRC) plan. The initial investment is very large, and many difficulties will be met. On the crucial issue of how to increase the number of recycled blades, the company not only tells users about the environmental benefits of recycling recycling, but also pays attention to the simplicity of operation, and constantly improves daily processes, from the appearance of packaging to Various aspects such as the transportation route between the collection station and the recycling plant.
The process consists of five main steps: 1. The customer orders the recycling bins and transport boxes from Sandvik Coromant and places them in the factory floor. 2. Collect waste blades in the recovery box. 3. After the recovery box is full, transfer the inner blade to the transport box (20 kg per box). 4. The customer transports the transport box to the local Sandvik Coromant office where it is re-routed to the collection station. Empty containers are returned to customers. 5. Used materials are remanufactured in Sandvik Coromant recycling plants using environmental safety technology.
Sandvik Coromant also recommends that all scrap carbide inserts be collected centrally in the production hall, and it is recommended that each station be equipped with a collection box, and the solid carbide drill and end mills should be stored in a collection box. When the bin is full, the scrapped tool can be transferred to a transfer box. When the transfer box is full, it can be delivered to Sandvik Coromant offices. Sandvik Coromant will weigh the entire solid carbide tool and pay it in the form of purchase.
Moreover, in order to facilitate more companies to join the team of recycling ideas, Sandvik Coromant is equipped with an expert responsible for recycling in every market where it conducts business. In this way, the manufacturer has an expert to assist with all recycling operations in each market.
They strive to achieve simple, effective, and scientific innovation services that make the operation more convenient and win more users' participation and support.
3. Achieving outstanding results and opening up a vast market In 2009, Sandvik Coromant's recycling of carbide inserts from companies around the world accounted for approximately 40% of sales.
Recently, there is such a news: "Sandvik Coromant's CRC plan has made great progress after 5 years of introduction in Greater China." In 2005, China's tool recycling quantity was 0, short. In a few short years, it is not just a breakthrough but a "great progress." Its typical success story is with the LKM Group, one of the world's largest mold-frame manufacturers. At that time, China's recycling market was still incomplete. When Longji hoped to recycle about 9.5 tons of waste blades, it would seek support from Sandvik Coromant. Sandvik Coromant was responsible for collecting used carbide blades. And solid carbide cutting tools, and recycling in the most environmentally friendly way.
This is a big step for Sandvik Coromant and a big step for Long Kee Group. It is also a big step for the recycling industry of tool recycling in China. Sandvik Coromant is confident in implementing the CRC program in China and will continue to invest in the world and implement the CRC program. With the emphasis placed on remanufacturing in various countries, there will be great progress and broader prospects for the remanufacturing of the tool industry such as recycling and tool dressing.
The CRC program is not only owned by Sandvik Coromant, it is also global, and in the near future, the CRC plan will be promoted and implemented by Sandvik Coromant. For the benefit of more customers, more countries, and the entire society.
Tinplate,Tin Free Steel,Electrical Tinplate,Tin Plated Steel
Comat Metal Products Co., Ltd. , http://www.china-tinplate.com