one. Spraying paint room safety procedures
Must be a trained professional to operate and use:
1. The first is to check whether the paint room power supply is normal.
2, the second is to turn on the lights to see if the lights are normal.
3, open the paint room fan is normal, there is no abnormal sound.
4, if the above are normal which can be sprayed.
5. After the paint is sprayed, check whether the oil is enough before painting. After turning on the ignition switch, check if the burner works normally.
It is best not to leave personnel between paints to prevent fire.
6. After the work is completed, the staff must cut off the power and close the paint door.
two. The use of paint room matters needing attention
With the development and needs of the society, the painting booths of the painting equipment have gradually infiltrated into various industries. Such as automotive, furniture, industrial sneeze need high temperature paint room production line.
According to the needs of a variety of paint rooms have come out, their operation and use is also a wide variety, attention is not the same as the difference between the automotive and furniture, such as the working principle: the car is a slight positive pressure There is a row of paint booths that do not feel the speed and pressure, furniture is a strong pressure, when you paint the door, you can feel a strong pressure. The second heating method is generally oil heating, furniture is mostly heated by infrared. The third car is dry and most of the furniture is wet.
It should be noted that one who operates a paint booth must be a trained professional who is familiar with paint booths.
2, pay attention to the power supply voltage of the paint room, pay attention to the outside of the paint room and the internal wire and cable should be checked regularly.
3, ventilation system (blower, induced draft fan, damper).
4, war system (burner, and heat exchanger)
5. Filtration system (inlet air inlet cotton, top filter cotton).
6, the cleanliness of the paint room must be kept clean.
As the weather gets colder, be sure to pay attention to the heating system of the paint room to avoid the fire. It must be checked whether there is any paint mist and internal carbon deposit on the outer wall of the heat exchanger. Whether the burner works or not.
three. Heating of paint booths
With the rapid decline of the weather, the heating of the paint room has also become a problem. Heating equipment not used for a year should also be maintained. Especially for automotive paint booths, some automotive spray paint booths are in large circulation. Sometimes the direction of the damper is wrong when painting, and a long paint mist is stuck on the heat exchanger. The more the more it gathers, the better it will be in the winter. The painted fog will catch fire and it will be sent to the filter room by the blower to catch fire on the filter cotton. Once it hits the high temperature composite board, it will catch fire, so the entire paint room will also be on fire. The paint room also needs to be maintained like a car for a certain number of kilometers, and the same time as the engine oil needs to be changed.
four. Heating method of paint room
There are two heating methods (oil and electricity) in the general baking room. For example, most automotive paint booths use oil for heating, diesel and motor oil. Now there is radiation heating of the electric heating plate, which is fast heating, but there is a certain danger. For example, in the winter spray paint, when the temperature of the spray paint room is relatively low, it needs to be heated. This is because the wind speed in the paint room does not feel radiation. The temperature brought about, relatively speaking, the temperature of the heating plate itself is above 200 degrees. At this time, when the density of the paint fog reaches a certain degree and it touches the heating plate, do you say that it will catch fire? People want to have new things, but you can filter it to bring you what you have lost, such as a new car you quickly bought, and soon you will have another one you will buy it? You can have a lot of cars, you can use a few cars, and others. I think people should think more about what this thing needs before I do something. It is an urgent need, whether it is OK or not, or for the satisfaction of my heart. There is a saying that I would like to do well. The furniture paint room is generally electrically heated. It requires a low temperature and is separate from the paint booth. Therefore, the probability of a fire outside the man-made fire is particularly low.
Fives. The relationship between furniture paint room and water curtain
Furniture paint room has become popular for a while now, many furniture spray paint room is equipped with a curtain. This is a good phenomenon, because the curtain can filter out more than 70% of the paint fog and gas, play a non-negligible role in environmental protection. People are good for the environment.
However, the curtain has increased the resistance to the ventilation of the furniture spraying booth. If the filter cotton in the painting room is not able to be discharged, the filter must be replaced. The paint room also needs maintenance. Just like a car, it needs to change the oil three filters when it is opened to 5000 kilometers. The filter room of the paint room also has a longevity. Generally, it will be replaced when it is busy for 2-3 months. It is not busy. It should be changed once again in half a year, so that it is beneficial to the live and paint rooms that are sprayed out, otherwise the spray paint room will leak air and open plastic. So don't lose it for smallness. This is some common sense about the maintenance of furniture paint booths.
Must be a trained professional to operate and use:
1. The first is to check whether the paint room power supply is normal.
2, the second is to turn on the lights to see if the lights are normal.
3, open the paint room fan is normal, there is no abnormal sound.
4, if the above are normal which can be sprayed.
5. After the paint is sprayed, check whether the oil is enough before painting. After turning on the ignition switch, check if the burner works normally.
It is best not to leave personnel between paints to prevent fire.
6. After the work is completed, the staff must cut off the power and close the paint door.
two. The use of paint room matters needing attention
With the development and needs of the society, the painting booths of the painting equipment have gradually infiltrated into various industries. Such as automotive, furniture, industrial sneeze need high temperature paint room production line.
According to the needs of a variety of paint rooms have come out, their operation and use is also a wide variety, attention is not the same as the difference between the automotive and furniture, such as the working principle: the car is a slight positive pressure There is a row of paint booths that do not feel the speed and pressure, furniture is a strong pressure, when you paint the door, you can feel a strong pressure. The second heating method is generally oil heating, furniture is mostly heated by infrared. The third car is dry and most of the furniture is wet.
It should be noted that one who operates a paint booth must be a trained professional who is familiar with paint booths.
2, pay attention to the power supply voltage of the paint room, pay attention to the outside of the paint room and the internal wire and cable should be checked regularly.
3, ventilation system (blower, induced draft fan, damper).
4, war system (burner, and heat exchanger)
5. Filtration system (inlet air inlet cotton, top filter cotton).
6, the cleanliness of the paint room must be kept clean.
As the weather gets colder, be sure to pay attention to the heating system of the paint room to avoid the fire. It must be checked whether there is any paint mist and internal carbon deposit on the outer wall of the heat exchanger. Whether the burner works or not.
three. Heating of paint booths
With the rapid decline of the weather, the heating of the paint room has also become a problem. Heating equipment not used for a year should also be maintained. Especially for automotive paint booths, some automotive spray paint booths are in large circulation. Sometimes the direction of the damper is wrong when painting, and a long paint mist is stuck on the heat exchanger. The more the more it gathers, the better it will be in the winter. The painted fog will catch fire and it will be sent to the filter room by the blower to catch fire on the filter cotton. Once it hits the high temperature composite board, it will catch fire, so the entire paint room will also be on fire. The paint room also needs to be maintained like a car for a certain number of kilometers, and the same time as the engine oil needs to be changed.
four. Heating method of paint room
There are two heating methods (oil and electricity) in the general baking room. For example, most automotive paint booths use oil for heating, diesel and motor oil. Now there is radiation heating of the electric heating plate, which is fast heating, but there is a certain danger. For example, in the winter spray paint, when the temperature of the spray paint room is relatively low, it needs to be heated. This is because the wind speed in the paint room does not feel radiation. The temperature brought about, relatively speaking, the temperature of the heating plate itself is above 200 degrees. At this time, when the density of the paint fog reaches a certain degree and it touches the heating plate, do you say that it will catch fire? People want to have new things, but you can filter it to bring you what you have lost, such as a new car you quickly bought, and soon you will have another one you will buy it? You can have a lot of cars, you can use a few cars, and others. I think people should think more about what this thing needs before I do something. It is an urgent need, whether it is OK or not, or for the satisfaction of my heart. There is a saying that I would like to do well. The furniture paint room is generally electrically heated. It requires a low temperature and is separate from the paint booth. Therefore, the probability of a fire outside the man-made fire is particularly low.
Fives. The relationship between furniture paint room and water curtain
Furniture paint room has become popular for a while now, many furniture spray paint room is equipped with a curtain. This is a good phenomenon, because the curtain can filter out more than 70% of the paint fog and gas, play a non-negligible role in environmental protection. People are good for the environment.
However, the curtain has increased the resistance to the ventilation of the furniture spraying booth. If the filter cotton in the painting room is not able to be discharged, the filter must be replaced. The paint room also needs maintenance. Just like a car, it needs to change the oil three filters when it is opened to 5000 kilometers. The filter room of the paint room also has a longevity. Generally, it will be replaced when it is busy for 2-3 months. It is not busy. It should be changed once again in half a year, so that it is beneficial to the live and paint rooms that are sprayed out, otherwise the spray paint room will leak air and open plastic. So don't lose it for smallness. This is some common sense about the maintenance of furniture paint booths.
Welding Machine, Portable Welding Machine, Welding Generator Set, Electric Welding Machine, Small Welding Machine
Zhejiang Taizhou Wangye Power Co., Ltd , http://www.wyengine.com