Which is better for the rubber injection molding machine?

Rubber Injection Molding Machine heat pumps Which is better? Rubber injection molding machine hot oil pump is generally used in rubber extrusion equipment, machine tool coolant circulation, mold temperature machine, rubber injection machine, such an important rubber injection molding machine hot oil pump, must not be cheap when buying, or not worth the loss, then the problem comes Which rubber injection molding machine hot oil pump is better? And Xiaobian to find out.

There are many manufacturers of rubber injection molding machine hot oil pumps on the market, but there are very few manufacturers that enjoy the popularity. The big taboo for buying things is to be greedy and cheap. The unknown small factory produces the products, although they can be used, but the temperament considerations and The service life and safety factor are far from being compared with well-known well-known manufacturers. After a series of investigations by Xiaobian, we solemnly recommend Kunshan Aolanke pump manufacturing.

Founded in 2007, the company is an independent subsidiary of Hong Kong Aode Electromechanical Group. The company is located in the northwest direction of the Pearl of the Yangtze River Delta - Kunshan.

Kunshan Aolanke Pump Manufacturing Co., Ltd. specializes in the production of special pumps for fluid temperature control equipment such as high temperature pumps, high temperature hot oil pumps, high temperature heat pumps, ultra high temperature coupling pumps and cold water circulation pumps. The pump produced by the company has exquisite appearance, small volume, high temperature resistance, low vibration, low noise, widely used supporting mold temperature control equipment, roller temperature control equipment, barrel constant temperature equipment, rubber injection equipment, machine tool coolant recovery, cold heat exchange. Equipment, medical sterilization equipment, constant temperature oil tank system, boiler hydration, boiler water recovery system, polyurethane foam, etc., involving plastics, rubber, optoelectronics, wind power, automotive, leather, food, woodworking, medical, chemical, steam generators, etc. .

橡胶注射成型机热油泵哪家好,橡胶注射成型机热油泵有什么优点,2017年最新橡胶注射成型机热油泵价格,橡胶注射成型机热油泵多少钱

Introduction to rubber injection molding machine hot oil pump:

The high-temperature hot oil pump of the rubber injection molding machine has the advantages of exquisite appearance, low vibration, low noise, high corrosion resistance of the pump body, high flow rate, no mechanical shaft sealing device, and no leakage.

Features:
1. The pump body is made of all-copper material, with beautiful appearance, precise matching, stable performance, low noise, low vibration, high lift, fast flow rate, 5 pump head immersed in circulating medium, no leakage, 6 inverted installation. , save space, simple on-site maintenance

Material:

1. Pump body: brass

2, bushing: graphite

3, the shaft material: 2cr13

4, motor insulation grade: F grade

5, impeller: brass

6, protection level: IP54

More information, all in GO Jiaju

Source: GO Jiaju


related articles

What are the advantages of a sheet-film extruder hot water pump? Which sheet of film extruder hot water pump is good?

What are the advantages of the extruder roller heating circulation pump? Which extruder roller heating circulation pump is good?

What are the advantages of the laminator hot oil circulation pump? Which laminator hot oil circulation pump is good?

What are the advantages of the veneer hot oil circulation pump? Which veneer hot oil circulation pump is good?

What are the advantages of the hot press heat transfer oil pump? Which hot press heat transfer oil pump is good?

Which is better for cold water pump? What are the characteristics of the cold water pump?

Which stainless steel pump is better? What are the characteristics of stainless steel pumps?

Which is a high temperature magnetic pump? How much is the high temperature magnetic pump?

Which mold temperature pump is better? What are the characteristics of the mold temperature pump?

Which is a high temperature pump? What are the advantages of high temperature pumps?


CONTACT US contact information

Kunshan Company KUNSHAN COMPANY

Address: No. 228 Wulian Road, Yushan Town, Kunshan City, Jiangsu Province

Add:#228 Wulian Road,Yushan Town,Kunshan City,Jiangsu

Phone/Tel: 15962508164 Miss Tube

Fax/Fax: +86-512-55193433

E-mail:

Http://


Hardening Accelerating Admixture

Rapid Hardening Concrete Admixture,Quick Setting Admixture,Concrete Hardener Admixture,Concrete Accelerator Admixture

Shanghai Na Long Tech Co., Ltd , https://www.na-long.com