How to choose a plate to buy a good plate to go 7 steps

First, recognize the difference between artificial veneer veneer and natural wood veneer veneer: the former texture straight, texture rules; the latter is natural wood pattern, texture is natural, variability is relatively large, no rules.

Second, the appearance. The plate should have a good aesthetic feeling, the material should be detailed and uniform, the color is clear, and the wood grain is beautiful. The texture of the matching plate and the parquet should be arranged according to certain rules, and the wood color is similar.

Third, no obvious flaws on the surface. The surface of the material is good and smooth, no burr groove marks and planer marks; no glue penetration phenomenon and board surface pollution; no cracks or cracks on the surface; the whole board has small natural warpage, avoiding improper operation of the sanding process, substrate The phenomenon of sand penetration revealed.

Fourth, the plastic layer structure is stable, no open plastic phenomenon. It should be noted that bulging and delamination cannot occur between the surface veneer and the substrate and between the internal layers of the substrate.

Fifth, to choose low formaldehyde release sheet. Decorative panels with pungent odors should be avoided. Because the greater the odor, the higher the amount of formaldehyde released, the greater the pollution, the greater the danger.

6. Choose products that have clear production companies. Should choose a product with a clear name, site and brand name.

Seventh, for the three-dimensional decorative panel, the inferior panel is lightly scribed on the nail surface with a nail, leaving a clear impression, and the high-quality decorative panel will not.

Plate purchase sheet formaldehyde decoration

Silicon Nitride is an important structural ceramic material. It is a superhard substance that is inherently lubricious and resistant to wear and is an atomic crystal; it is resistant to oxidation at high temperatures. Moreover, it can resist cold and hot shock, and is heated to above 1000 ° C in the air, and is rapidly cooled and then heated rapidly without breaking. It is precisely because of the excellent properties of Silicon Nitride Ceramics that it is often used to manufacture mechanical components such as bearings, gas turbine blades, mechanical seal rings, and permanent molds. If a silicon nitride ceramic that is resistant to high temperatures and does not easily transfer heat is used to manufacture the heating surface of the engine component, not only the quality of the diesel engine can be improved, fuel is saved, but also thermal efficiency can be improved.

Silicon Nitride Ceramic Standard Parts

Silicon Nitride Ceramic Standard Parts,Silicon Nitride Parts,Advanced Ceramic Parts,Glass Ceramic Parts