Cano tile   Carrie bathroom
Types of ceramic tiles
1, glazed wall tiles. Commonly referred to as tiles, due to hanging a layer of glaze on the surface of fine clay, it is called glazed tiles. Glazed tile glazed smooth, colorful patterns, a single color, printing, high-art design. Glazed tiles have the characteristics of no dirt absorption, corrosion resistance, and easy cleaning, so they are mostly used in kitchens and bathrooms. The glazed tile has a higher water absorption rate (the state stipulates that the water absorption rate is less than 21%). After the water absorption of the ceramic body, the surface glaze with small moisture absorption and expansion is in the state of Zhang pressure, long-term freezing and thawing, peeling and peeling will occur, so it cannot be used. Outdoor.
2. Colorful glazed ceramic tiles. Abbreviated as color glazed tiles, the surface is beautifully glazed and patterned. The state stipulates that the water absorption rate of such products is not more than 10%, because the fine ceramic green body has small moisture absorption and expansion, and can be well combined with the glaze. Therefore, it has high strength and can be used on the ground as well as on the wall surface.
3, porcelain tiles. Also known as homogeneous bricks, bricks, tiles. The sintering temperature of the brick is high and the degree of porcelain is good. The water absorption rate is less than 0.5% and the moisture absorption expansion is extremely small, so the brick has high bending strength, wear resistance, acid and alkali resistance, no discoloration, and long service life. Freeze-thaw cycle at -15°C-20°C 20 times without visible defects.
Picking points
1. Take any piece of brick inside the box and check whether the surface of the brick is bright or deformed. It is not allowed to have defects such as missing corners, missing edges, missing glazes, holes, spots, etc.
2, take more than four pieces of ceramic tiles put together in the plane, to see if the color of the brick is the same, the pattern is complete; a little further to see if the overall effect is ideal.
3, take more than two pieces of ceramic tile put in the glass plane, to see if the brick surface is flat; hand press the diagonal of the brick to see if there is Alice; see the gap, the smaller the better.
4, take two bricks touch, listen to the sound is crisp and loud. If there is an abnormality, there is a crack in the brick or there is residual air in the tile during sintering.
5, buy the necessary tiles at a time, so as to avoid color differences.
6, remove the size of tiles that do not meet the requirements.
>>> attitude more than 80,000 brilliant colors put on a colorful feast 90 flat idyllic nest
Tiles Buying Building Materials Knowledge Tiles Glass Glass Bricks Kitchen Wall Tiles Kitchen Glass Sliding Doors Bathroom Wall Tiles Bathroom Tiles Bathroom Tiles Whole Bathroom Bathroom Size Kitchen Tiles Acid Tiles
Molten Iron S Type Platinum Rhodium Expendable Thermocouple Tips,Oliter Fast Expendable Hotsale Type B Disposable Thermocouple Tip For Molten Steel 604 Triangle Connector
Sanitary Ware.Co., Ltd , http://www.nbthermocouple.com