Tip 1. If you decide to slot the pipe on the wall, it is best to ask the property first. If you imagine taking the pipe, you can not slot it. If you can't, it's better to think of Other methods. Otherwise, it will be anxious. Faint tricks. Tip 2. For the shower and shower faucet to stay in the hot and cold water interface, be sure to adjust the angle when installing the water pipe. It is best to buy the shower in advance and try it out. Pay particular attention to simply screwing the shower on the tiles before putting them on, and then remove them after installing the tiles and installing them at the end. To prevent the tiles from being fixed when the tiles have been installed, and because of the angle problem, it is not possible to install the tiles again. Tip 3: The water inlet port for the toilet must be adapted to the height of the toilet tank from the floor. If it stays high, it may conflict when the toilet is finally installed. Tips 4, wash basin, if you install the pedestal, pay attention to the distance between the hot and cold water outlet not too wide, or installed a pedestal, the width of the pedestal column that can not cover the hot and cold water pipes, from the pedestal basin Look, you can see the water pipes on both sides.
Stickers 5, the bathroom in addition to the washing machine to stay out of the faucet, it is best to leave a faucet interface, so that later want to contact the watering of what is convenient. This problem can also be solved by purchasing a shower with a tap.
Stickers 5, the bathroom in addition to the washing machine to stay out of the faucet, it is best to leave a faucet interface, so that later want to contact the watering of what is convenient. This problem can also be solved by purchasing a shower with a tap.
Tile Toilet Faucet Bathroom Tiles Bathroom Wash Basin
Wooden Paint,Zinc Stearate,Zinc Stearate Powder
Tianyi Chemical Engineering Material Co., Ltd. , http://www.gdchemicalmaterial.com