What are the precautions for installing the floor heating? How to install warm

What are the precautions for installing the floor heating? Warming is very important. Every building will have something. Then what issues should be noticed when installing the floor heating? This is a problem that many people are not concerned about. They are all encountered in the decoration and will only look for this knowledge. Today's website Xiao Bian introduced to you to introduce the warm installation precautions? How to install warm?

First of all, choose professional construction personnel. If you choose a professional construction person to decorate, you will save a lot of effort, because professional masters will know more about it, so that you know what kind of construction will be done and you will not make mistakes that will lead to a final rework. This is very good. Many people are willing to pay more and are not willing to rework. This is very troublesome, so we must pay attention to this point.

Secondly, the sealing of the floor heating system must be checked before paving. The ground must be dry (can be judged by experimental phenomena). The moisture content of the cement floor should be less than 1.5%. The indoor humidity should not be too large. Regardless of whether there is geothermal heating or not, the ambient humidity is preferably around 60 degrees before and after installation. No nailing is allowed on the ground during construction. After construction, the ground is also prohibited from nailing to prevent damage to the heating coil. Before laying the laminate flooring, an EPE composite film (EPE composite film must be marked with special words for floor heating) shall be used to isolate the moisture and release the moisture from the skirting board around. These are some points that we need to pay attention to.

Third, be sure to use floor heating special glue when laying floors, so that it will be able to get a good touch, and will not cause damage to the floor and under the warm pipes, so this must be noted. Paving the ground and installing the skirting board must be performed in two separate steps. 48 hours after laying the floor, the glue is completely dry, and the skirting board is removed after removing the fastener. The floor can only warm up after 24 hours of installation. These points are all people should pay attention to.

What are the precautions for floor heating? The above points are summarized for everyone on this website. I believe that everyone will have a certain understanding. I hope everyone will have some help when laying. If you still want to say, you can say Come out and share it together.

Warm

    OPT Tool has an extensive background, technical expertise and resources to engineer your Step Drill from a concept, hand sketch, CAD print to the actual tool.

    Whether it be one tool or a production run, innovative technologies allow us to cost effectively design and manufacture your tools.

ADVANTAGE:

Carbide Step Drills  as our Carbide Cutter material ensure our product quality;
Robust geometry and grade for wide rang of material processing;
Suitable for a large rang of materials;
High precision applications in various materials;
Regrindable;
Tailor made options;
Walter Helitronic Power grinder and Zoller Smile measuring tools as our production and testing equipment as well as our skilled staff  to guarantee the product 



Flexible in order quantity:

Samples can be provided before mass production, and MOQ can be discussed accordingly.


PRODUCT DETAIL:




Carbide Step Drills


Carbide Step Drills3Carbide Step Drills4Carbide Step Drills2


carbide step drills6

carbide step drills7




PRODUCTING PROGRESS:

4product detail-fanyi

PAYMENT AND DELIVERY:

banggong huang jing

PRODUCT EQUIPMENT :

product equipment

ABOUT US :

     We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts , PCD Reamers , PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc., 


     We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.


    Our best selling of cutting tools include PCD Inserts, PCD End Mill , PCD Ball Nose Mill, PCD Reamer , Carbide Taps , Carbide End Mill , Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.

banggong huang jing

quanlity control:


We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.

great service


Carbide Step Drills

Cobalt Drill Bits,Solid Carbide Step Drills,Carbide Step Drill Bit,Carbide Step Drills

OPT Cutting Tools Co., Ltd. , https://www.optdiamondtools.com