The control signal lightning protector is used to protect sensitive high-speed communication network lines from being damaged by lightning induced voltage, power interference, electrostatic discharge, etc. The signal lightning protector adopts multi-stage protection circuit, uses the world famous brand components and components, and uses advanced production technology to manufacture. It has characteristics of large flow capacity, low residual pressure level, responsiveness, stable performance and reliable operation.
Installation and maintenance:
1. The lightning arrester is connected in series between the protected device and the signal channel.
2. The input (IN) of the lightning arrester is connected to the signal channel, and the output (OUT) is connected to the input of the protected device.
3. Connect the lightning protection device's grounding wire and the lightning protection system's ground wire reliably.
4, this product does not require special maintenance. If there is a problem with the lightning arrester when the system works, you can remove the lightning protector and check it. If the system returns to normal after it is used, replace the lightning protector.
AS-CT Shenzhen Security Control Signal Lightning Protection Device
Application scope:
Suitable for all kinds of LAN, RS-232/RS-422/RS485 and CAN pressure contact type communication line control signal equipment to protect it from damage caused by over-voltage, over-voltage and electrostatic discharge.
Features:
â– Multi-stage protection circuit, low residual voltage, good protection effect.
â– Large flow capacity and fast response.
â– Superior signal transmission performance and low insertion loss.
â– Easy to use and easy to install.
â– The core components use international brand products and have excellent performance.
WE DRILL MORE WITH LESS .
• Our bits reduced the drilling cost
• Both improved directional capability
• Quickly response to application changes
• Provide specific bit designs and customized designs .
• Optimized designs for mud motor and RSS applications
Installation and maintenance:
1. The lightning arrester is connected in series between the protected device and the signal channel.
2. The input (IN) of the lightning arrester is connected to the signal channel, and the output (OUT) is connected to the input of the protected device.
3. Connect the lightning protection device's grounding wire and the lightning protection system's ground wire reliably.
4, this product does not require special maintenance. If there is a problem with the lightning arrester when the system works, you can remove the lightning protector and check it. If the system returns to normal after it is used, replace the lightning protector.
AS-CT Shenzhen Security Control Signal Lightning Protection Device
Application scope:
Suitable for all kinds of LAN, RS-232/RS-422/RS485 and CAN pressure contact type communication line control signal equipment to protect it from damage caused by over-voltage, over-voltage and electrostatic discharge.
Features:
â– Multi-stage protection circuit, low residual voltage, good protection effect.
â– Large flow capacity and fast response.
â– Superior signal transmission performance and low insertion loss.
â– Easy to use and easy to install.
â– The core components use international brand products and have excellent performance.
WE DRILL MORE WITH LESS .
Great PDC Bits ,also named Fixed Cutter Bits . It is including Matrix Body PDC Bits and Steel Body PDC Bits.
• Our bits reduced the drilling cost
• Both improved directional capability
• Quickly response to application changes
• Provide specific bit designs and customized designs .
• Optimized designs for mud motor and RSS applications
PDC Bits
PDC Bits,Fixed Cutter Bits, PDC Drilling Bits, PDC Drill Bits
CANGZHOU GREAT DRILL BITS CO., LTD , https://www.triconerockbits.com