Hydraulic control valve is a water pressure control valve, which consists of a main valve and attached to the catheter ﹑ pilot valve ﹑ needle valve, ball valve and pressure gauge and
Other components. The use of hydraulic control valve, we must first pay attention to selection. Shanghai Guilong valve found that the selection of non-hydraulic control valve, will cause water and air leakage phenomenon. Selection of hydraulic control valve, the device must be consumed per hour steam multiplied by the selection rate of 2-3 times the maximum condensate, to select the displacement of hydraulic control valve. To ensure that hydraulic control valve in the car as soon as possible to discharge condensate, the rapid increase in temperature of heating equipment. Hydraulic control valve discharge energy is not enough, will cause condensation can not be discharged in time, reducing the thermal efficiency of heating equipment. Selection of hydraulic control valve, hydraulic control valve can not be selected nominal pressure, because the nominal fmjyh0919 pressure can only represent the pressure level of hydraulic control valve body shell, hydraulic control valve nominal pressure and the pressure difference is very large. Therefore, according to the working pressure to choose the hydraulic control valve displacement. Working pressure is the difference between the working pressure before the hydraulic control valve minus the back pressure at the outlet of the hydraulic control valve. The choice of hydraulic control valve requires accurate impeding the drainage of water, sensitive water control valve is high, can improve steam utilization, no leakage of steam, reliable performance, high back pressure, long life, easy maintenance is the preferred conditions.
Pipeline Inner Anti-corrosion Tape
I. Description:
Pipeline Inner Anti-corrosion Tape is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machine
â…¡.Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
III .Features
Excellent adhesion to pipe and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
â…£.Technical datas:
Pipeline Inner Anti-corrosion Tape
Inner Anti-corrosion Tape, Polyethylene Inner Wrap Tape, PVC Pipe Wrap Tape For Pipeline, Metallic Pipeline Wraps
Jining Xunda Pipe Coating Materials Co.,Ltd , http://www.pipe-wrap.com
