Stainless steel capillary First, the definition of stainless steel coil Stainless steel coil, generally diameter of 0.5 to 20mm, thickness of 0.1 to 2.0mm plate mounted or mosquito coils installed; widely used in chemical, mechanical, electronic, electrical, textile, rubber, food, medical Equipment, aviation, aerospace, communications, petroleum and other industrial fields. Stainless Steel Coil Picture Picture provided by Jiangsu Yeqing Stainless Steel Co., Ltd Second, the type of stainless steel coil Stainless steel industrial pipe, ultra-long coil, U-tube, pressure pipe, heat transfer tube, fluid pipe, spiral coil Features: high temperature steam, impact corrosion, ammonia corrosion; anti-fouling, Safe and reliable; pipe wall is uniform, wall thickness of only 50-70% of the copper, the overall thermal conductivity is better than the total thermal conductivity is better than, Brass; the old unit is the transformation and manufacture of new equipment ideal heat exchanger products. In the petrochemical industry, electric power, nuclear industry, medicine, food and other industries can be widely used. Third, the use of stainless steel coil Industrial stainless steel coil: heat exchangers, boilers, petroleum, chemical, fertilizer, chemical fiber, pharmaceutical, nuclear power and so on. Stainless steel coils for fluids: Beverages, beer, milk, water systems, medical equipment, etc. Stainless steel coil for mechanical structure: printing and dyeing, printing, textile machinery, medical equipment, kitchen equipment, automotive and marine accessories, construction and decoration. Bright stainless steel coil: welded by a good stainless steel strip and then reduce the wall, from thick to thin wall, this process can make the wall thickness uniform, smooth, and reduce the wall of the wall to form a seamless tensile effect. Seamless in accordance with the naked eye, but the process is the pipe. Reduce the wall with the process of bright annealing, so that the inner and outer walls will not form oxide, inside and outside the bright, beautiful, this is really medical products needed. The next process needs sizing, that is, a small pull process to determine the diameter, diameter tolerance can generally be positive and negative 0.01mm. Specifications: 3/8 "* 0.049 * (1 ~ 2000m) 1/8 "* 0.035 * (1 to 3500 m) 1/4 "* (0.035" to 0.049) * (1 to 1800 m) 1/2 "* 0.049 * (1 to 1000 m) Φ3 * 0.9 * (1 ~ 3500m) Φ4 * 0.9 * (1 ~ 2500m) Φ6 * 0.9 * (1 ~ 1700m) Φ8 * 1 * (1 ~ 1000m) Φ10 * 1 * (1 ~ 8000m) Φ (10-26) ★ (1-2) length (1-800m) diameter according to customer requirements Material: 201,202,304,304 L, 316L, 317L, 321 (also according to user requirements) Pressure: 60-100MPa Implementation of the standards: in line with ASTM A269-2002.JIS G4305 Technical requirements
