Wall clothing is one of the wall decoration materials, a new type of decorative materials introduced from abroad. Now many domestic owners use wall clothing for wall decoration materials, but there are many people who have very little knowledge of wall clothing What are the shortcomings , then the following editor will take you to understand the shortcomings of the lower wall clothing and its construction steps and precautions!
What are the disadvantages of wall clothing
The shortcomings of wall clothing are actually not many, there are two main points.
1. Difficult to clean. Wall clothes are water-soluble materials. Although they have a good adsorption effect, they are difficult to clean if they encounter oil stains and dust.
2. The price is expensive. There are not many domestic manufacturers of wall clothes. Most of them are imported from abroad, so they are much more expensive than other ordinary wall decoration materials.
Construction steps and precautions of wall clothing
1. Construction steps
1. Pour the wall clothing into a clean and large plastic container, add appropriate amount of warm water according to the packaging requirements of the wall clothing, the temperature of the water temperature is between 20 ℃ -40 ℃, in order to prevent the wall clothing from being contaminated, use a clean Tap water, add warm water and stir evenly,
2. Put the agitated wall clothing for about an hour before using it. If it is used immediately, it will reduce the bonding strength and fluidity of the product. After an hour has passed, the wall clothing should be evenly mixed again to ensure that there is no agglomeration before construction begins.
3. Use a plastic spatula to glue the well-stuck wall clothing to the wall, and then use a roller brush to roll it evenly. The thickness of the wall clothing is between 1-2mm. After the construction is completed and dry, if you find uneven or bare walls, you can spray some warm water, then apply the wall coat and roll it flat. For small exposed walls, after being sprayed with warm water, just use roller brush to roll it without adding new materials.
4. The last time the material is applied by roller, the direction should be the same as before, otherwise the texture of the wall clothing will appear messy, and then the light will be refracted, which will make the overall color of the wall uneven and the visual effect will be affected.
5. At the female and female corners of the wall, you can use a plastic scraper to coat and shape, and then use a roller to brush the roller again.
2. Construction considerations
1. The construction work of a room is best completed in one day to avoid inconsistent dryness of the wall.
2. Stir the used wall-coating material, if you want to use it, cover the product with a wet towel that does not fade, so as to prevent the evaporation of water, and it will not deteriorate in 48 hours.
3. It takes a certain period of time for the wall clothing to be completely dry after painting. To ensure that the wall is not contaminated by garbage and dust, the construction site should be clean, which can speed up the circulation of indoor air and reduce the pollution of the wall.
Editor's summary: The above is about the shortcomings of the wall clothing and the relevant content of the wall clothing construction steps. Wall clothing is a good choice for wall decoration materials, and the construction is relatively simple, but the above considerations can not be ignored, I hope everyone has Help.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
Disadvantages of wall clothing
Xiaoxian RuiYi Commercial Trade Co.,Limited , https://www.ryaluplate.com