The cost of home improvement is a large amount, and many people want to save the province. However, the relative functionality of the bathroom still needs to be relatively strong. If you don't pay attention to the point of saving money, if you cut it at will, your bathroom will have endless troubles. In order to avoid the emergence of such problems, Xiao Bian specially summed up what should not be saved for everyone, pay attention to these points, saving money is not a problem!
Pipeline budget cannot be saved
Water and electricity are not done well, and the decoration is equal to zero. The bathroom is a place where multiple water and electricity are collected. If the water leakage occurs due to problems in design and material selection, the cost of rework can be a small amount. Therefore, it is necessary to select good quality water pipes, wires and wire tubes in the early stage, and the wiring must comply with the regulations.
Reserved sockets cannot be saved
As space expands and functions increase, there are more and more appliances in the bathroom. Many families have installed smart toilets, whole bath rooms, jacuzzi, multi-function bathroom cabinets and other sanitary appliances or TV, audio and other audio-visual equipment. The budget is limited during the renovation, and the socket can be reserved first to avoid troubles in rewiring in the future.
Waterproof material cannot be saved
Waterproofing in the bathroom is also very important. Not only the material is good, but also painted as required. Ground waterproofing is generally required to be brushed twice and subjected to a 24-hour water shut-off test, while the wall waterproofing should also be 180 cm high. The waterproofing of the corners and water pipes should be done carefully. This is the most prone to problems.
Ground slip can not be saved
There is often water supply on the floor of the bathroom, and ordinary tile people walk on it and slip easily. In particular, families with old people and children should pay more attention to this problem. Therefore, we must pay attention to the anti-slip property when choosing the floor material for the bathroom. Although the price is more expensive, it is the safety and health of the family when it is used.
Heating equipment cannot be saved
Bathing at home has become the habit of most people, but the bathroom is not a warm place, especially in winter, a large temperature difference is easy to get sick. Therefore, heating equipment such as floor heating, heat sinks, and Yuba are also indispensable items in the bathroom. The product type is determined by the specific circumstances.
High quality sanitary ware cannot be saved
Sanitary ware is used frequently and is rarely replaced after installation, so the quality of the product must be good. Otherwise, there will be problems at both ends of the three days, not only repairing troubles, but also easily causing water leakage, difficulty in cleaning, and inability to use. The choice of faucet and hose is particularly important, and it is often replaced if it is not well chosen.
Tempered glass cannot be saved
It is often said that there are incidents such as shower rooms, glass basins, etc., which are mainly related to the quality of the glass used. Good tempered glass is generally difficult to break and will not hurt when broken. Therefore, for safe use, don't be greedy for the time being, try to choose a brand with good quality and good reputation.
Common objects cannot be saved
Floor drains and ceiling lights are common but unobtrusive objects in the bathroom. Their quality also directly affects everyone's normal life. The selection of the floor drain is not easy to cause the drainage to be poor or the water to return to the smell. The ordinary lamp will not light after the damp, so the ceiling lamp must be treated with moisture.
Shutter Magnet For Precast Formwork are used for building constructions , shuttering magnets is a formwork holder, or cement hold magnet box which made of steel and Block Magnet .The structure of concrete magnet is very trim, every mechanic part are well welded thus the structure is also very stable. Construction workers could adjust the magnetic force through rotate the bold nut,thus they could remove the Magnetic Formwork Systems easily. The steel shell could focus most of the magnetic force to the bottom while prevent corrosion.The steel surface is plastic sprayed please do not make abrasion on it.
However, there are two means to use Magnet for Precast formwork, first one is to build a concrete formwork directly on the ground,then inject the concrete,this one is more flexible on construction design . Second one is use the Magnet For Precast Concrete on a concrete formwork platform, remove the shuttering magnet
solutions when concrete is hardened ,then move the concrete wall to a ground or warehouse with a forklift or crane,hence build construction will much faster and safer. workers could build construction much more quickly and safely and make more money from their hard work, and construction businessmen could also make and save more money from their business.
Shuttering magnet is consist by neodymium block magnet, and steel house,the magnet is very big size thus the magnetic force is very large.
Precast magnet box, a magnetic tool to hold concrete formworks. After setting the magnet to the formwork,concrete could be inject into the formwork, The concrete will be formed trimly just as the formwork likes.Shuttering magnet is made of big block Neodymium Magnet and the steel house, there are two hex bolt and a round handle button on the top of the Precast Concrete Magnet , the hex bolt is for fixed with adapter and handle button is for push to use.
How to use Shuttering And Formwork Magnet? People who use this Shuttering Magnet Box need to find some shuttering adapter to suit the precast magnet box onto the concrete framework, this framework could be made of plywood,wood, iron steel, aluminum... Then push the round handle button on the top, the block magnet in steel box will sink and contact and catch with iron steel part. If someone need to remove the shuttering Magnetic box, he need to find a crowbar and pry up the round handle button and the block magnet will return to its position and not catch the iron steel.
Shuttering Magnet for Precast Formwork
Magnetic Formwork Systems,Magnet For Precast Formwork,Shutter Magnet,Shuttering And Formwork Magnet,Shuttering Magnet Box
NINGBO SHINE MAGENETIC TECHNOLOGY CO.,LTD , https://www.shinemagnets.com