 |
With the maturity of solar power generation technology, energy efficiency is higher and higher, but its cost is still slightly expensive. A technology engineering team from the start-up Glint Photonics is developing a new adaptive material technology for solar power generation, which is said to reduce the cost of solar power plants to half that of today.
Current commercial solar panel devices use tracking technology to track the angle of sunlight and change the position of the panel to maximize solar energy. However, this new company's composite material technology uses another way of thinking. By increasing the use of the solar panel's light reflection and refraction characteristics, it captures light from various angles to obtain the maximum amount of solar energy.
The new material technology consists mainly of a series of small lenses that refract light and efficiently capture solar energy at various angles. The captured energy is transmitted to high-concentration cells in the panel. The top of the glass panel is coated with a large amount of this material. These materials enable solar panels to efficiently capture sunlight from all angles without having to track the sun's direction of change.
The technology is still in the development stage and there is still some distance from commercial scale production. However, the team claimed that if this technology is used, the cost of solar energy can be reduced from the current 8 cents per kilowatt-hour to 4 cents per kilowatt-hour. The cost is half that of current solar panel power generation devices.
Drill just rely on the motor to drive the drive gear to increase the strength of the drill bit rotation, so that the drill bit metal, wood and other materials to do the form of scraping holes.
The impact drill is equipped with adjusting knob,adjustable drill and impact drill in two ways. But the impact drill is used on the inner shaft gear beating each other to realize the impact effect, but the impact is far less than electric hammer. It can also drill reinforced concrete, but the effect is poor.
Hammer Drill is not the same, it is the use of the bottom of the motor drive two sets of gear structure, one to achieve it drilling, while the other is driven piston, like the engine hydraulic stroke, resulting in a strong impact force.
Hammer Drill,Electric Hammer Drill,Rotary Hammer Drill,Dewalt Hammer Drill
Ebic Tools Limited , http://www.ebictools.com