View the operation status of imported bearings in the operation

Home>Bearing Knowledge>View the operation status of imported bearings in operation
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

View the operation status of imported bearings in the operation

Source: China Bearing Network Time: 2013-03-04
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
How to check the operation status of the imported bearings in the operation; firstly from the three aspects of the oscillation of the imported bearings; the rolling and the temperature:
The first is to check the oscillation state of the imported bearings in the operation from the shedding, indentation, corrosion, cracks, wear, etc. will be reflected in the oscillation measurement of the imported bearings; the impact of the imported bearing oscillation on the bearing is very sensitive; The special imported bearing oscillating measuring device (frequency analyzer, etc.) can be used to measure the large oscillation. U De Shi Zhi 豢 豢 鲆 鲆 鲆 5 5 5 5 5 咛迩榭 咛迩榭 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于 由于The orientation is different; therefore, the demand is analyzed beforehand to determine the specification of each machine.
The second is to check the sound condition of the imported bearing when it rolls over. Because the imported bearing has slight damage such as peeling off, it will announce abnormal sounds and irregular sounds; therefore, the sounder can be used for resolution; the sounder is selected; the import in the operation The size and sound quality of the bearing tumbling sound to view; play early to avoid the effect.
In the end, it is necessary to check the temperature of the imported bearing. If the oil hole can directly measure the bearing outer ring temperature, it is more suitable. Under normal conditions; the temperature of the imported bearing; generally can be estimated according to the temperature of the outdoor bearing inlet. If it is smooth and the device is suitable, the bearing temperature will rise sharply; abnormal temperature will occur; it is necessary to stop the operation; take necessary precautions. Generally; the temperature of the imported bearing gradually rises with the start of the operation; after 1-2 hours Arriving at a stable condition. The normal temperature of the imported bearings is due to the heat capacity of the machine; the heat dissipation; the speed and load are different. If necessary, the operating temperature of the bearing can be monitored at any time by using a thermal sensor; and the alarm is activated when the temperature exceeds the specified value. Stop to avoid the burning of the shaft incident.


Recommend to friends comments close window

Bearing related knowledge
Classification of ceramic bearings
SKF bearing casting method and several key skill skills in target bearing production analysis of bearing device precision rolling bearing heating device method


This article links to http://
Please indicate the bearing network http://

Previous:Magnetic Suspension NSK Bearing Development: The Application and Protection of Deep Groove Ball Bearings

Alkali

Aluminium Hydroxide,Aluminic Acid,Aluminic Hydroxide

Co., Ltd. , http://www.chaluminumhydroxide.com