When commissioning a small feed pellet machine, take 10 kg of mixture or rice bran, add 1-2 kg of vegetable oil, mix a small heap of about 3 kg, add 0.5 kg of vegetable oil, and put a small pile of feed first.
When debugging small feed pellet machine, take 10 kg of mixture or rice bran, add 1-2 kg of vegetable oil to mix, and divide a small heap of about 3 kg, plus 0.5 kg of vegetable oil to mix, first put a small pile of feed. Then open the feed pellet machine, immediately adjust the two "adjustment screws" to rotate the pressure roller and the template. The gap between the normal template and the pressure roller is 0.1-0.3 mm. The pellets are extruded and the feed is added to the feed pellet machine. Add a small pile of oil, if it can not be squeezed, stop the feed in the template hole, clamp the steel nails with a vise, and then follow the above method until the discharge is normal, repeat processing 15-30 times, run-in to the template The hole is smooth, and then wait for the 30th oily feed to finish, immediately follow the processing of the feed, and when the processing is finished, then process the oily feed, let the oily feed in the template hole, so that the template hole can keep the lubrication, etc. At the beginning of the secondary processing, the adjustment screw is added to the oily feed. See the method, and the template is processed several kilograms, and can be processed without oily feed in the future.
Http://news.chinawj.com.cn
Submission:
Flowmeter Measurement,Ultrasonic Flow Meter,Liquid Flow Meter,Magnetic Flow Meter
Wuxi Winsun Automation Instrument Co., Ltd , https://www.jswxwinsun.com