Some people choose to lay the floor tiles when they are renovating, while others choose solid wood floors. Is the floor tile and solid wood flooring comparable? Is the solid wood floor good or the laminate flooring good? The solid wood floor and the laminate flooring are the ones who are dead? The three consecutive questions are the topics we will focus on in this issue. Next Xiaobian take everyone together to see what good or wood flooring laminate flooring related exciting content.
1. Controversy about arching
Due to the production of raw materials, the floor will inevitably be deformed after the tide, so there is a coefficient of dry and wet expansion in the national standard of the floor. However, the solid wood floor is reflected in the dryness of the floor, and the composite floor is the bending strength. Another reason for the solid wood floor arching is the degree of dryness of the keel. If the quality of the keel is bad, it will affect the use of the solid wood floor. Therefore, the solid wood floor arching is not necessarily the reason of the floor. The choice of accessories is also very important. On the one hand, the arching of the composite floor is a problem of the floor substrate, and on the other hand, it is caused by the accumulation of water during the daily maintenance. If there is no artificial factor, it is the quality of the floor. As for the problem of expansion joints, no matter what the floor needs to be reserved, this is an industry regulation. Even if the customer does not ask for it, explain to the customer why it must be left. I don’t think anyone knows that there will be no expansion joints. After the consequences, it is also required to leave no expansion joints. Why the flooring industry mostly adopts one-year free maintenance after-sales service, because the floor is rarely affected after the weather changes in the spring, summer, autumn and winter seasons.
2. Disputes about wear resistance.
Personally feel that solid wood flooring should not do too much publicity on the wear-resistant, if it is wear-resistant or laminate flooring. Because the general solid wood floor surface is uv paint, piano paint and other lacquer, and the uv paint is the most wear-resistant, the solid wood composite floor is similar to the solid wood floor, but the surface also has aluminum oxide (multi-layer solid wood composite). The surface of the reinforced floor is made of aluminum oxide wear-resistant layer. The national standard is 6000 rpm but it is a little more than 20,000 rpm. Moreover, the household laminate flooring does not need to be too high, and generally the high wear-resistant floor is paved in commercial or sports places. The problem of cracking at the edge of the floor is a problem that needs to be paid attention to to laminate flooring, but it does not affect the performance of the laminate flooring itself. Why is it easy to occur because of the characteristics of the aluminum oxide layer on the floor surface, although It is wear-resistant but the texture is brittle, and a slight bump will fall off, which is only for a single floor. The floor is completely paved, because the height difference is almost non-existent, so there is generally no corner after installation, but avoid sharp objects to rub the floor surface. This is different from the wear resistance of the floor. Therefore, it is not scientific to say that it is conditional to wear only when the floor is fractured. Can't even compare the "iron cloth" qigong to the floor, although the idea is very good, but it is too exaggerated.
3. Disputes about maintenance.
The maintenance of solid wood flooring is more troublesome. The high-grade floor needs to be carefully taken care of, and now the price of solid wood composite flooring is more expensive than that of solid wood flooring. Of course, maintenance should be more expensive. Strengthening the floor also requires Maintenance, but relatively easy, it is enough to use a mop without dripping.
4. Disputes about waterproofing.
I don't want to make too much explanation on this point. After the floor meets the water, it will definitely be deformed. Some of the floors may be restored to original, but most of the floor will be deformed. You can soak a small piece of floor in the water. It will definitely be deformed if it is heated. But what about a floor? If you change a standard length of floor, use a floor area with a unit area? Who can guarantee? Not deformed?
5. Disputes about environmental protection.
The concept of environmental protection has now covered a wide range (speaking more general). The environmental protection of laminate flooring is reflected in two aspects. On the one hand, the raw material of the floor substrate is the crushed product of the quick-form material. The growth of the quick-form material is very fast, and the cycle is several years (I don’t know much about it because Fast-growing materials are used in new energy sources in China) and do not affect forest resources. On the one hand, the release of formaldehyde, the role of formaldehyde in the production of laminate flooring, so formaldehyde is an essential raw material, so there is a national standard. Formaldehyde is not less, the better, too little, the stability of the substrate, not too much, too much harm to the human body. In the national standard 1.5ml / L floor can be used with confidence. Parquet consists of three-layer and multi-layer parquet, the same as the national standard. Because the formaldehyde release is almost zero, the solid wood floor is environmentally friendly for the human body, but since the raw materials are all wood, it is not environmentally friendly in terms of resources and environmental protection.
The above content is a wonderful introduction to the solid wood flooring or the laminate flooring. I hope that every reader can be deaf and can be applied in real life, and you will benefit a lot. Ok, today's introduction to solid wood flooring or laminate flooring is here. Thanks to the readers for reading this article and for their support and love for Xiaobian. If you want to get more home improvement information, Please continue to pay attention to the decoration home network.
More related wonderful reading:
Which solid wood flooring is good? Top ten brands of solid wood flooring
Our solid wood flooring is good, the introduction of solid wood flooring
Is the solid wood floor good? Solid wood flooring advantages and buying skills
What is imitation wood flooring? Is it imitation of solid wood flooring?
Is the solid wood floor good? Advantages and disadvantages of solid wood flooring
A Gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression.
Gaskets allow for "less-than-perfect" mating surfaces on machine parts where they can fill irregularities. Gaskets are commonly produced by cutting from sheet materials.
Gaskets for specific applications, such as high pressure steam systems, may contain asbestos. However, due to health hazards associated with asbestos exposure, non-asbestos gasket materials are used when practical.
It is usually desirable that the gasket be made from a material that is to some degree yielding such that it is able to deform and tightly fill the space it is designed for, including any slight irregularities. A few gaskets require an application of sealant directly to the gasket surface to function properly.
Some (piping) gaskets are made entirely of metal and rely on a seating surface to accomplish the seal; the metal's own spring characteristics are utilized (up to but not passing σy, the material's yield strength). This is typical of some "ring joints" (RTJ) or some other metal gasket systems. These joints are known as R-con and E-con compressive type joint.
Gasket
PTFE Gasket, Spiral Wound Gasket, Ring Joint Type Gaskets
Shijiazhuang Bang dong Pipeline Technology Co,Ltd. , https://www.bd-pipefitting.com