Maybe a lot of people like Xiaobian, the first time I saw the caulking agent, I realized that the original small caulking agent also has so many colors, it is really up. Today, I will take a look at the small version of the decoration home network to see how the caulking color and tile color matching skills and tile grouts can be used for your reference.
What is a caulk?
Tile grouting agent is made of exquisite quartz sand, high-quality cement, pigment filling, auxiliaries, etc., which are accurately compounded by advanced production technology to make the color more vivid and durable, and the wall tiles are coordinated and unified. It has beautiful appearance, anti-seepage, anti-cracking and anti-breaking. Mildew, anti-alkali.
Caulkability characteristics
1, the surface is smooth, such as porcelain, high strength, wear-resistant, non-stick dirt, easy to clean, a wipe to clean, to avoid cracks and mold to endanger human health.
2, with waterproof, impervious, oil-free characteristics, so that the tile seams will never be dirty.
3, the decorative effect is particularly strong, rich in color, natural and delicate, with luster, no fading, bringing a better overall effect to the wall.
4, there are currently ivory, black pearls, noble gray, enamel gold, moonlight silver, sapphire common colors, as well as more exotic colors such as strange and luminous.
5, green and environmentally friendly, advanced materials, non-toxic, tasteless, free of benzene, toluene, xylene. It meets the limit of harmful substances in the national standard GB18583-2001.
6. Convenient construction, simple operation, injecting brick joints, using a scraper or a finger. This product is semi-fluid, only with a rough surface, no smooth surface.
How to use caulk
1. Pour the special stirring solution into the clean container, slowly add the caulking agent, stir evenly to the uniform paste without the powder group, let stand for 3-5min, then add the stirring.
2. Squeeze the mixed caulking agent along the diagonal direction of the masonry into the reserved gap. Do not leave it blank. Scrape the excess slurry with an angled action with the gap. Be careful to avoid embedding it. The slurry in the gap is taken out.
3. After 10-15 minutes or the surface is dry, use a sponge, a slightly damp cotton cloth or a towel to wipe the surface with a circular motion, and further press the caulk to make the caulk dense and smooth.
4. After the grout is dry, wipe the surface of the masonry with a sponge or a clean cotton cloth to remove residual grout. The amount of caulking agent is related to the size of the required filling. 5kg of caulking agent can be used for 4~5 square meters with 5mm seam and 7~8 square meters with 3mm seam.
General construction points of caulking agent
The first step: clean up the parts that need to be filled, no debris, water accumulation, dry and flat
Step 2: Mix the water and the caulking cement thoroughly (the ratio of water to cement is about 1:3:5) and let stand for 5-10 minutes.
Step 3: Use the bottom gray spoon to squeeze the mixed caulking agent into the reserved joint along the diagonal direction of the tile, and compact it with a rubber putty knife. After the initial filling of the caulk, use a slightly wet Sponge cleans up excess caulking agent on the tile surface
Step 4: After 24 hours, use a dry cloth for further cleaning; the cured tile grout has waterproof function.
Filler dosage calculation
Total consumption (kg/m2) = (brick length + brick width) ÷ (brick length X width) X brick height X slit width X1.7 (cement-based grout)
How to match tiles and caulks more harmoniously
- from the depth of color -
The general practice of 1 brick caulking is to use light-colored seams for dark bricks and dark-colored seams for light-colored bricks. Yellow tiles can be filled with a dark caulk. However, the floor tiles are more susceptible to soiling with light-colored seams (white, yellow, vanilla). In daily use, dirty water is absorbed by the caulking agent when mopping the floor, and it becomes gray in a few days.
2 color seams will be more resistant to dirt. If you don't like black seams, consider gray (black plus white, proportion yourself), it is recommended to use "coffee". Adding white is light brown, and adding black is dark coffee. Suitable for many warm tones of tiles. Toning is to use dry powder, do not add water. The color will appear darker after adding water.
- from the space area -
1 floor tile is recommended to use dark caulking agent, resistant to dirt.
2 wall tiles are recommended to use light color caulking agent
The above is the whole content of the caulking agent brought to you by Xiaobian. I believe that after reading this article, the young master has a basic understanding of the caulking agent. If you want to know more about the decoration consultation, please click to enter the decoration. Process section.
More related wonderful reading:
How to use tile grout? Tile grouting method
What is the tile grout? Top ten brands of tile grouts
What is a tile grout? How to use tile grout?
Food Additives Refers to the production of food by the food manufacturer in the process of adding some chemicals, used to change the color of food, smell, or adjust the food taste and prolong the preservation time (preservatives, antioxidants), but some will Leading to cancer, such as many of the meat material added by some of the substances in the stomach due to protein, stomach acid, additives generated by the interaction of nitrite, can lead to physiological and chronic lesions. These chemicals are known as food additives.
Food Additive,Natural Food Additive,Isolate Food Additive,Popular Food Additive
SHANDONG ZHISHANG CHEMICAL CO.LTD , http://www.zhishangpharma.com