The kitchen is the second most used water in the bathroom. The waterproof and leakproof kitchen is very important for the whole home, including the upper and lower neighbours. Some houses have been in the kitchen for a long time, and water leaks into the downstairs, causing the neighborhood to be cornered. Therefore, when the house is renovated, it is necessary to take precautions against it. The following Xiaobian of the Qinhuangdao decorative network tells everyone about the precautions for kitchen decoration.
1. Before the decoration, carefully check whether there is leakage in the kitchen on the upper floor. If there is, you should first let the waterproof project upstairs be renovated.
2. When the kitchen is renovated, if the original wall and floor tiles are knocked out and refurbished, no matter whether the waterproof layer has been used or not, the waterproof layer should be redone before re-applying the wall and floor tiles. The waterproof layer of the surrounding side wall is 200mm high and there is a bathtub. The waterproof layer should be able to spray all parts of the shower.
3. Waterproof treatment when the kitchen is not renovated: If the waterproof layer is not used before, add the waterproof layer according to the above method; if the waterproof layer has been used, it should be carefully checked to see if the waterproof layer is in place and there is no damage, otherwise it should be repaired. After the repair, the water injection test is carried out, and there is no leakage or humidity in the downstairs and surrounding walls.
4. After the renovation of the wet and humid parts of the kitchen, the elevation of the ground should be lower than the elevation of the hall or corridor floor. Stones that are not afraid of water should be installed at the door of the kitchen. Waterproofing should be done at the roots to prevent water from seeping from the door to the living room.
Loneng logo is top quality Rotary Hammer, Electric Hammer,electric Hammer drill in the china.This machine could give you more easy and fast working feeling.Could make your working more efficiency.This logo machines' silicon steel is Baosteel 45 cold-rolled steel material.The round copper wire is high temperature.The commutator is certificated in china.The quality must be certificated.We also control the tolerance and allowable to error in the different of spare parts in one machine.
This machine 608 bearing use C&U original bearing.Another bearing also use certificated quality.The power and working efficiency is highest in china market.LONGNENG is in the life of from scratch,from gifted,from excellent, to cope with the market competition down-to-earth.
Our products have set a good reputation in china. and have good feedback of the quality in china market.We are been paid more attention by the old and new customers in the world also.
LONENG Rotary Hammers, LONGNENG Rotary Hammer Drill, Cordless Rotary Hammer Drill, Air Rotary Hammer Drill, Pneumatic Rotary Hammer Drill
Yongkang Longneng Power Tools CO., LTD. , http://www.longnengtool.com