There are a lot of people who don't know about stone renovation, don't know what kind of stone, and when they need to be refurbished. Here to explain to everyone, let everyone have a comprehensive understanding of what kind of marble renovation.
1. The first kind of stone that needs to be refurbished is: the stone has been used for a long time, because the normal friction damage, the gloss is lowered; if it is re-decorated or to enhance the image, then the original stone is generally No need to replace it, but you need to ask a professional company to professionally renovate the marble to ensure that the original stone is renewed with new brilliance.
2. The second type of stone that needs to be refurbished is: When the decoration stone is completely paved, there will be a slate gap. At this time, the gap should be filled with a color similar to the stone.
After filling it up, it is necessary to polish and polish the filling agent. This is also a kind of stone renovation treatment.
3. The third kind of stone that needs to be refurbished is: Everyone knows that when the decoration is being carried out, a large number of decoration personnel need to move many objects, such as lifting frames, ladders, and decoration personnel can not always pay attention to the protection of the stone surface. Therefore, it sometimes causes wear and tear. In severe cases, it will damage the stone. Sometimes, because of the different levels of the decoration company personnel, the effect on the stone decoration is not good. At this time, the dislocation and uneven stone should be refurbished again.
Conforms to the requirements of EN12209-3
Single or 3 deadbolts with one or two throws.
Quick reversible latch for easy on-site handing.
Reversible latch bolts can be optioned to be operating by key or lever.
3point latch to enable smooth and quite closing . Also can prevent door from slamming.
Large range of cylinders conforming to EN1303 with various features.
The KA and MK/GMK are available
Face plate
Material: Stainless steel 201 304 316
Type: round head / square head
Thickness: 3mm
Width: 22mm
Finish: SS/SP/AB/AC/ PVD
Striker plate:
Material: Stainless steel 201 304 316
1.2mm thickness, 1.5mm available
Finish: SS/SP/AB/AC/ PVD
Lock case
Material: Steel, 1.2mm thickness
Electrolysis board/Yellow crackle/Silver board/Black crackle/ Snow-flake board.
Latch Bolt And Dead Bolt Mortise
Latch Bolt And Dead Bolt Mortise,Dead Bolt Mortise,Latch Bolt,Safety Dead Bolt
Rayma(SJZ) International Trading Co., Ltd. , http://www.raymalock.com