Wardrobe layout should vary from person to person

Wardrobe layout should vary from person to person Custom wardrobes are tailored to the user's needs. However, people's needs often change with age, occupation, etc. What kind of wardrobe design is considered scientific and reasonable design to meet various needs?

Increase in the proportion of clothes hanging area Currently, the setting of clothes hanging area in custom closet is becoming more and more common. Now people have a fast pace of life and it takes time to stack clothes. At the same time, in addition to sweaters, clothes are nowadays less and less suitable for stacking. From these considerations, when designing a wardrobe, designers usually increase the proportion of clothes hanging area. The proportion of stacked areas gradually decreases. Currently, the stacked area only accounts for about a quarter of the closet, and is usually set at the top of the closet.

Usually, a wardrobe with a height of 2.4 meters is taken as an example. Usually, the top layer is a stacking area and the height is about 40 centimeters. The lower part is designed as a hanging area and is divided into upper and lower layers. Generally, the lower layer has a greater height than the upper layer, so that the angle of bending can be reduced when the clothes hanging below are taken.

At the same time, when the seasons are changing, the hanging area can also be converted into a stacking area. The clothes that need to be stored are put in a storage box, neatly placed in the hanging area, and the storage requirements of the stacking area are realized.

Wardrobe layout The first consideration for custom wardrobes is the user's needs. For example, the home stacker is a quilt and bedding, but these two items are placed in different locations. The quilt is only used in winter each year, so it can be placed on the top of the wardrobe, and the bedding needs to be replaced regularly. To be placed in a convenient location, it is usually set at a reasonable distance of 1.5 meters from the ground.

In the layout of the wardrobe, the designer often considers the interior layout of the wardrobe based on the owner's gender, height, and occupation. For example, the height of the suspension zone of an ordinary female owner is usually about 1.1 meters, but if the owner is very tall, the length of his clothes is also relatively long, and the height of the hanging area in the closet needs to be increased.

In order to make the wardrobe more flexible, it is possible to make the plywood and clothing poles of the clothes area adjustable. For example, in a child's wardrobe, when the child is younger, the position of hanging clothes does not require a lot of space. The area is mainly based, but when the children go to school, their height grows rapidly. At this time, the height of the clothes-hanging area needs to be adjusted accordingly. An adjustable partition can solve this problem.

Metal pull basket wool sweaters are not suitable for hanging, because long-term hanging will be deformed. However, if you stack it in a closed drawer and then take it out after spring and summer, the smell of wool will be heavy and there will be wrinkles, so you can put it in a metal pull basket and keep it ventilated.

In order to avoid wrinkles when stacking trousers, western trousers racks can be hung with trousers racks. However, the utilization rate of the trousers rack is not high, and a 600 mm wide trousers rack usually can only hang 6 to 8 trousers. The price of trousers is usually several hundred dollars. The designer suggested that if there are no special needs, it may be more economical to use a trousers rack to hold the trousers and hang them in the hanging area.

The storage box with a uniform storage box can be used to fill the corners of the hanging area, and can also be used to change the hanging area to the stacking area. When choosing a storage box, consider the size of the wardrobe and the height of the space.

Pressure Shut-off Valves

Pressure Shut-Off Valves basically consist of the main valve with the main spool assembly, pilot valve with pressure adjustment element and check valve. In size 10 valves, the check valve is built into the main valve. In valve sizes 25 and 32 the check valve is built into a separate plate installed under the main pressure shut-off valve type DA.

Features:

l  For subplate mounting

l  4 adjustment elements

Rotary knob

Sleeve with internal hexagon and protective cap

Lockable rotary knob with scale

Rotary knob with scale

l  3 pressure ratings

l  Solenoid actuated unloading via a built-in directional valve

Pressure Shut-off Valves

Pressure Shut-Off Valves,Water Shut Off Valve,Plumbing Shut Off Valve,Pressure Shut Off Valve

Jinan Longli Hydraulic Device Co.,Ltd , http://www.longlihydro.com