Home>Bearing knowledge>Application of wheel bearing and equipment considerations

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Wheel bearing applications and equipment considerations

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Please pay attention to the following items in the application and equipment of the hub bearing:
1. To ensure safety and reliability for the maximum limit; advocate that you always look at the early warning signal that the hub bearing pays attention to whether the bearing can wear regardless of the length of the car: including any conflicting noise during the transition or when the suspension combination wheel is turning Unusual slowdown.
For rear-wheel-drive vehicles, the vehicle travels to 38,000 km to deal with the smoothness of the front hub bearings. When exchanging the brake system; look at the bearings and exchange the oil seals.
2. If you hear the noise announced in the bearing part of the hub; firstly; it is important to find the position of the noise. There are many moving parts that can produce noise; it can also be that some of the transitions and the non-transformed parts have a touch. If it is confirmed to be a bearing Noise in the middle; the bearing can be damaged; demand exchange.
3, because the front wheel caused the failure of the two sides of the bearing working conditions are similar; so even if only one bearing is broken; also advocates pair exchange.
4, the wheel bearing is more sensitive, in any case, it is necessary to choose the correct method and suitable things. In the process of storage and transportation, the bearing parts can not be damaged. Some bearings require a large pressure to press in; therefore, the demand is dedicated Things. Must refer to the car production manual.
5, equipment bearings should be in a clean and tidy environment; fine particles into the bearing will also shorten the life of the bearing. It is very important to keep the environment clean when exchanging bearings. Do not use the hammer to strike the bearing; Dropped on the ground (perhaps a similar disposition). The shaft and housing should also be viewed before the equipment; even small wear can cause poor cooperation; then lead to early failure of the bearing.
6. For the hub bearing unit; do not attempt to disassemble the hub bearing or adjust the seal ring of the hub unit; otherwise the seal ring will damage the water or dust, and even the seal ring and the inner ring raceway will be damaged. The permanent failure of the bearing.
7. There is a magnetic thrust ring in the sealing ring bearing the bearing of ABS equipment. This kind of thrust ring can not be bumped, impacted or collided with other magnetic fields. Take it out of the box in front of the equipment; keep them away from magnetism.褂 缍虻缍ぞ叩 oyster. When these bearings are equipped; after the road condition test, investigate the ABS alarm needle on the outer dial; to change the operation of the bearing.
8. Wheel bearing with ABS magnetic thrust ring; in order to determine which side the thrust ring is mounted on; it can be close to the margin of the bearing with a small thing; the magnetic force generated by the bearing will attract it. The device will have a magnetic thrust ring. One side points to the inside; is facing the sensitive components of ABS. Note: Incorrect equipment can cause the function of the brake system to fail.
9, many bearings are sealed; this type of bearing is not required to add smooth grease throughout the life period. Other unsealed bearings, such as double row tapered roller bearings, in the equipment, it is necessary to add grease smooth. Because the inside of the bearing The cavity is not the same size; so it is difficult to determine how much grease to add, the most important thing is to ensure that there is grease in the bearing. If the grease is too much, when the bearing changes, the remaining grease will seep out. Usually experienced: in the equipment; The total amount must account for 50% of the gap in the bearing.
10. When the equipment locks the nut, the bearing type and the bearing seat are different; the torque is very different.

---

Recommend to friends comments close window

Bearing related knowledge

"High-speed bearing" device cooperation and adjustment methods In detail, the eight functional requirements of motor bearing grease are correct. The operation of the device is the key to the long life of the bearing. SKF double row cylindrical roller bearing type suffix explanation

This article links to http://
Please indicate China Bearing Network http://

Previous:Axis parts processing technology (2)
The next part: Introduction to the smoothing of the single-stage single-suction centrifugal pump bearing smoothing method

China Film Faced Plywood including 18mm Film Faced Plywood,natural glulam,Black Film Faced Plywood that is the hot sale products for construction in Africa , Middle East and South Africa .

China film faced Plywood with cheap price is your first chose .

Fushi Brand BQ Film Faced Plywood is the NO.1 Brand in West Africa Area . Now , at presnet Our main market include Africa , South America , Middle East and Australia .

Fushiwood Group produced the first film faced plywood since 2001 in CHINA,and keeps to be leading Asian film faced plywood manufacturer in accordance with OSHA,AS1577 AND EN 13377.
With the big capacity of 300*40`H container film faced plywood per month,we are exporting film faced plywood all over the world.
Products safety and quality are certified by ISO19001,ISO14001,SONCAP,CARB,FSC and CE of Europe .

Plywood Type Poplar Core Black Film Faced Plywood 

18mm Film Faced Plywood Qatar for Construction

 18mm WBP Film Faced Plywood (Formwork)

Packing Plywood With WBP Glue

Structural Plywood

Anti Slip Plywood

Container Flooring Plywood

Interior Plywood

18mm Commercial Plywood

Plywood Dimension

915x1830mm, 1220x2440mm, 1250x2500mm, 1200x1800mm, 1200x2400mm

 

From Imperial system (British system)

 

1 inch = 25.4mm  1 foot = 12 inch = 304.8mm

 

1220x2440 ≈ 4x8 feet 

 

 915x1830 ≈ 3x6 feet

Poplar Core Black Film Faced Plywood  for Construction

Film Faced Plywood

Film Faced Plywood, Brown Film Faced Plywood, Black Film Faced Plywood,18mm Film Faced Plywood

Fushi Wood Group , http://www.fushiplywood.com